Amazon.com: Asic Bitcoin Miner: Computers & Accessories

Decred Journal – September 2018

Note: you can read this on GitHub (link), Medium (link) or old Reddit (link).

Development

Final version 1.3.0 of the core software was released bringing all the enhancements reported last month to the rest of the community. The groundwork for SPV (simplified payment verification) is complete, another reduction of fees is being deployed, and performance stepped up once again with a 50% reduction in startup time, 20% increased sync speed and more than 3x faster peer delivery of block headers (a key update for SPV). Decrediton's integrations of SPV and Politeia are open for testing by experienced users. Read the full release notes and get the downloads on GitHub. As always, don't forget to verify signatures.
dcrd: completed several steps towards multipeer downloads, improved introduction to the software in the main README, continued porting cleanups and refactoring from upstream btcd.
Currently in review are initial release of smart fee estimator and a change to UTXO set semantics. The latter is a large and important change that provides simpler handling, and resolves various issues with the previous approach. A lot of testing and careful review is needed so help is welcome.
Educational series for new Decred developers by @matheusd added two episodes: 02 Simnet Setup shows how to automate simnet management with tmux and 03 Miner Reward Invalidation explains block validity rules.
Finally, a pull request template with a list of checks was added to help guide the contributors to dcrd.
dcrwallet: bugfixes and RPC improvements to support desktop and mobile wallets.
Developers are welcome to comment on this idea to derive stakepool keys from the HD wallet seed. This would eliminate the need to backup and restore redeem scripts, thus greatly improving wallet UX. (missed in July issue)
Decrediton: bugfixes, refactoring to make the sync process more robust, new loading animations, design polishing.
Politeia: multiple improvements to the CLI client (security conscious users with more funds at risk might prefer CLI) and security hardening. A feature to deprecate or timeout proposals was identified as necessary for initial release and the work started. A privacy enhancement to not leak metadata of ticket holders was merged.
Android: update from @collins: "Second test release for dcrandroid is out. Major bugs have been fixed since last test. Latest code from SPV sync has been integrated. Once again, bug reports are welcome and issues can be opened on GitHub". Ask in #dev room for the APK to join testing.
A new security page was added that allows one to validate addresses and to sign/verify messages, similar to Decrediton's Security Center. Work on translations is beginning.
Overall the app is quite stable and accepting more testers. Next milestone is getting the test app on the app store.
iOS: the app started accepting testers last week. @macsleven: "the test version of Decred Wallet for iOS is available, we have a link for installing the app but the builds currently require your UDID. Contact either @macsleven or @raedah with your UDID if you would like to help test.".
Nearest goal is to make the app crash free.
Both mobile apps received new design themes.
dcrdata: v3.0 was released for mainnet! Highlights: charts, "merged debits" view, agendas page, Insight API support, side chain tracking, Go 1.11 support with module builds, numerous backend improvements. Full release notes here. This release featured 9 contributors and development lead @chappjc noted: "This collaboration with @raedahgroup on our own block explorer and web API for @decredproject has been super productive.".
Up next is supporting dynamic page widths site wide and deploying new visual blocks home page.
Trezor: proof of concept implementation for Trezor Model T firmware is in the works (previous work was for Model One).
Ticket splitting: updated to use Go modules and added simnet support, several fixes.
docs: beginner's guide overhaul, multiple fixes and cleanups.
decred.org: added 3rd party wallets, removed inactive PoW pools and removed web wallet.
@Richard-Red is building a curated list of Decred-related GitHub repositories.
Welcome to new people contributing for the first time: @klebe, @s_ben, @victorguedes, and PrimeDominus!
Dev activity stats for September: 219 active PRs, 197 commits, 28.7k added and 18.8k deleted lines spread across 6 repositories. Contributions came from 4-10 developers per repository. (chart)

Network

Hashrate: started and ended the month around 75 PH/s, hitting a low of 60.5 and a new high of 110 PH/s. BeePool is again the leader with their share varying between 23-54%, followed by F2Pool 13-30%, Coinmine 4-6% and Luxor 3-5%. As in previous months, there were multiple spikes of unidentified hashrate.
Staking: 30-day average ticket price is 98 DCR (+2.4). The price varied between 95.7 and 101.9 DCR. Locked DCR amount was 3.86-3.96 million DCR, or 45.7-46.5% of the supply.
Nodes: there are 201 public listening nodes and 325 normal nodes per dcred.eu. Version distribution: 5% are v1.4.0(pre) dev builds (+3%), 30% on v1.3.0 (+25%), 42% on v1.2.0 (-20%), 15% on v1.1.2 (-7%), 6% on v1.1.0. More than 76% of nodes run v1.2.0 and higher and therefore support client filters. Data as of Oct 1.

ASICs

Obelisk posted two updates on their mailing list. 70% of Batch 1 units are shipped, an extensive user guide is available, Obelisk Scanner application was released that allows one to automatically update firmware. First firmware update was released and bumped SC1 hashrate by 10-20%, added new pools and fixed multiple bugs. Next update will focus on DCR1. It is worth a special mention that the firmware source code is now open! Let us hope more manufacturers will follow this example.
A few details about Whatsminer surfaced this month. The manufacturer is MicroBT, also known as Bitwei and commonly misspelled as Bitewei. Pangolinminer is a reseller, and the model name is Whatsminer D1.
Bitmain has finally entered Decred ASIC space with their Antminer DR3. Hash rate is 7.8 TH/s while pulling 1410 W, at the price of $673. These specs mean it has the best GH/W and GH/USD of currently sold miners until the Whatsminer or others come out, although its GH/USD of 11.6 already competes with Whatsminer's 10.5. Discussed on Reddit and bitcointalk, unboxing video here.

Integrations

Meet our 17th voting service provider: decredvoting.com. It is operated by @david, has 2% fee and supports ticket splitting. Reddit thread is here.
For a historical note, the first VSP to support ticket splitting was decredbrasil.com:
@matheusd started tests on testnet several months ago. I contacted him so we could integrate with the pool in June this year. We set up the machine in July and bought the first split ticket on mainnet, using the decredbrasil pool, on July 19. It was voted on July 30. After this first vote on mainnet, we opened the tests to selected users (with more technical background) on the pool. In August we opened the tests to everyone, and would call people who want to join to the #ticket_splitting channel, or to our own Slack (in Portuguese, so mostly Brazilian users). We have 28 split tickets already voted, and 16 are live. So little more than 40 split tickets total were bought on decredbrasil pool. (@girino in #pos-voting)
KuCoin exchange listed DCBTC and DCETH pairs. To celebrate their anniversary they had a 99% trading fees discount on DCR pairs for 2 weeks.
Three more wallets integrated Decred in September:
ChangeNow announced Decred addition to their Android app that allows accountless swaps between 150+ assets.
Coinbase launched informational asset pages for top 50 coins by market cap, including Decred. First the pages started showing in the Coinbase app for a small group of testers, and later the web price dashboard went live.

Adoption

The birth of a Brazilian girl was registered on the Decred blockchain using OriginalMy, a blockchain proof of authenticity services provider. Read the full story in Portuguese and in English.

Marketing

Advertising report for September is ready. Next month the graphics for all the ads will be changing.
Marketing might seem quiet right now, but a ton is actually going on behind the scenes to put the right foundation in place for the future. Discovery data are being analyzed to generate a positioning strategy, as well as a messaging hierarchy that can guide how to talk about Decred. This will all be agreed upon via consensus of the community in the work channels, and materials will be distributed.
Next, work is being done to identify the right PR partner to help with media relations, media training, and coordination at events. While all of this is coming up to speed, we believe the website needs a refresher reflecting the soon to be agreed upon messaging, plus a more intuitive architecture to make it easier to navigate. (@Dustorf)

Events

Attended:
Upcoming:
We'll begin shortly reviewing conferences and events planned for the first half of 2019. Highlights are sure to include The North American Bitcoin Conference in Miami (Jan 16-18) and Consensus in NYC (May 14-16). If you have suggestions of events or conferences Decred should attend, please share them in #event_planning. In 2019, we would like to expand our presence in Europe, Asia, and South America, and we're looking for community members to help identify and staff those events. (@Dustorf)

Media

August issue of Decred Journal was translated to Russian. Many thanks to @DZ!
Rency cryptocurrency ratings published a report on Decred and incorporated a lot of feedback from the community on Reddit.
September issue of Chinese CCID ratings was published (snapshot), Decred is still at the bottom.
Videos:
Featured articles:
Articles:

Community Discussions

Community stats:
Comm systems news: Several work channels were migrated to Matrix, #writers_room is finally bridged.
Highlights:
Twitter: why decentralized governance and funding are necessary for network survival and the power of controlling the narrative; learning about governance more broadly by watching its evolution in cryptocurrency space, importance of community consensus and communications infrastructure.
Reddit: yet another strong pitch by @solar; question about buyer protections; dcrtime internals; a proposal to sponsor hoodies in the University of Cape Town; Lightning Network support for altcoins.
Chats: skills to operate a stakepool; voting details: 2 of 3 votes can approve a block, what votes really approve are regular tx, etc; scriptless script atomic swaps using Schnorr adaptor signatures; dev dashboard, choosing work, people do best when working on what interests them most; opportunities for governments and enterprise for anchoring legal data to blockchain; terminology: DAO vs DAE; human-friendly payments, sharing xpub vs payment protocols; funding btcsuite development; Politeia vote types: approval vote, sentiment vote and a defund vote, also linking proposals and financial statements; algo trading and programming languages (yes, on #trading!); alternative implementation, C/C++/Go/Rust; HFTs, algo trading, fake volume and slippage; offline wallets, usb/write-only media/optical scanners vs auditing traffic between dcrd and dcrwallet; Proof of Activity did not inspire Decred but spurred Decred to get moving, Wikipedia page hurdles; how stakeholders could veto blocks; how many votes are needed to approve a proposal; why Decrediton uses Electron; CVE-2018-17144 and over-dependence on single Bitcoin implementation, btcsuite, fuzz testing; tracking proposal progress after voting and funding; why the wallet does not store the seed at all; power connectors, electricity, wiring and fire safety; reasonable spendings from project fund; ways to measure sync progress better than block height; using Politeia without email address; concurrency in Go, locks vs channels.
#support is not often mentioned, but it must be noted that every day on this channel people get high quality support. (@bee: To my surprise, even those poor souls running Windows 10. My greatest respect to the support team!)

Markets

In September DCR was trading in the range of USD 34-45 / BTC 0.0054-0.0063. On Sep 6, DCR revisited the bottom of USD 34 / BTC 0.0054 when BTC quickly dropped from USD 7,300 to 6,400. On Sep 14, a small price rise coincided with both the start of KuCoin trading and hashrate spike to 104 PH/s. Looking at coinmarketcap charts, the trading volume is a bit lower than in July and August.
As of Oct 4, Decred is #18 by the number of daily transactions with 3,200 tx, and #9 by the USD value of daily issuance with $230k. (source: onchainfx)
Interesting observation by @ImacallyouJawdy: while we sit at 2018 price lows the amount locked in tickets is testing 2018 high.

Relevant External

ASIC for Lyra2REv2 was spotted on the web. Vertcoin team is preparing a new PoW algorithm. This would be the 3rd fork after two previous forks to change the algorithm in 2014 and 2015.
A report titled The Positive Externalities of Bitcoin Mining discusses the benefits of PoW mining that are often overlooked by the critics of its energy use.
A Brief Study of Cryptonetwork Forks by Alex Evans of Placeholder studies the behavior of users, developers and miners after the fork, and makes the cases that it is hard for child chains to attract users and developers from their parent chains.
New research on private atomic swaps: the paper "Anonymous Atomic Swaps Using Homomorphic Hashing" attempts to break the public link between two transactions. (bitcointalk, decred)
On Sep 18 Poloniex announced delisting of 8 more assets. That day they took a 12-80% dive showing their dependence on this one exchange.
Circle introduced USDC markets on Poloniex: "USDC is a fully collateralized US dollar stablecoin using the ERC-20 standard that provides detailed financial and operational transparency, operates within the regulated framework of US money transmission laws, and is reinforced by established banking partners and auditors.".
Coinbase announced new asset listing process and is accepting submissions on their listing portal. (decred)
The New York State Office of the Attorney General posted a study of 13 exchanges that contains many insights.
A critical vulnerability was discovered and fixed in Bitcoin Core. Few days later a full disclosure was posted revealing the severity of the bug. In a bitcointalk thread btcd was called 'amateur' despite not being vulnerable, and some Core developers voiced their concerns about multiple implementations. The Bitcoin Unlimited developer who found the bug shared his perspective in a blog post. Decred's vision so far is that more full node implementations is a strength, just like for any Internet protocol.

About This Issue

This is the 6th issue of Decred Journal. It is mirrored on GitHub, Medium and Reddit. Past issues are available here.
Most information from third parties is relayed directly from source after a minimal sanity check. The authors of Decred Journal have no ability to verify all claims. Please beware of scams and do your own research.
Feedback is appreciated: please comment on Reddit, GitHub or #writers_room on Matrix or Slack.
Contributions are also welcome: some areas are adding content, pre-release review or translations to other languages.
Credits (Slack names, alphabetical order): bee, Dustorf, jz, Haon, oregonisaac, raedah and Richard-Red.
submitted by jet_user to decred [link] [comments]

Minted our first bitcoin this morning! Took about 18 hours (Butterfly Labs Mini Rig SC 500 GH/s)

http://i.imgur.com/LvDPIjY.png
We're using the Butterfly Labs 500 GH/s Mini Rig.
Might as well do a small review -- the hardware itself is temperamental. For example, ours showed up with the unresponsive Nexus tablet on the front panel. Dealing with Butterfly is a total shit sandwich given the rip-and-run state of the overall business, so I had to figure out how to bypass the internal routing and have a laptop be the brains of the operation.
After a couple of days of messing with usb drivers, which refused to stand up on Windows 7, I finally got the laptop to recognize all 8 modules. However, I could not start mining due to an error starting the bfg miner task from the inside of their Easy Miner application. I tried to force bfg via the command line, and it finally worked, although the hash rate was atrocious.
Another day or so, and I had the rig mining. The hardware recognition issue was due to me not giving the laptop enough time to kick ALL modules on. It takes a good 2-3 minutes for all usb notifications to stop bleep-blooping. The hash rate was in the 470 GH/s area, which was perfect, but then the modules started to shut themselves off due to overheating at 83 C. The log would show how the unit was taking down hot modules and then kicking them back on non-stop. The ambient temp in the room is around 75. I played with positioning, fan speeds, to no avail. The hash rate at that point dropped into the 400s, and my 15 amp circuit breakers started to get tripped. This went on for a little, and then I permanently blew one of them and had to pick some up at the Home Depot. But hey, it only took a single trip :)
So then I got a 5200 BTU A/C unit, mounted it in the window, and positioned the rig in front of it. That seemed to fix the breaker-tripping and overheating issues. It runs at low 70s C during the day and low 60s C at night. I am now making custom funnels out of thermal foam board to vent exhaust heat outside and also connect the 11" AC opening to the 16"x16" intake area of the rig (looks something like this). The unit generates a lot of heat, no joke. I bet when the weather gets colder, it can serve as a furnace for this side of the house. If you're wondering why I'm talking about it still not being cold outside in November, I'm in Texas. It's really beautiful right now, high of 75 and sunny.
Also, the noise ... how could I forget about the noise. It sounds like a server room. There's 18 fans, plus PSU fans, and they are quite loud. Don't expect to inconspicuously set this rig in the corner of your living room.
It's been on for over 24 hours now, uninterrupted. To the moon!
Timestamp,Core Temp,AC ON/OFF,Total Mined (BTC)
11/1/2013 12:00 PM,80 C,OFF,0.00
11/3/2013 3:30 PM,73 C,OFF,1.78
11/4/2013 2:05 PM,75 C,ON,2.28
11/5/2013 11:00 AM,75 C,ON,2.74
11/6/2013 5:00 PM,70 C,OFF,3.18
11/7/2013 12:00 PM,79 C,OFF,3.53
11/8/2013 5:00 PM,70 C,OFF,4.03
11/13/2013 11:00 PM,68 C,OFF,6.01
11/18/2013 5:00 PM,78 C,OFF,7.69
11/23/2013 11:00 AM,66 C,OFF,9.21
11/26/2013 8:00 PM, 62 C,OFF,10.41
submitted by ironmine to Bitcoin [link] [comments]

The $22,484.00 Butterfly Labs Mini Rig bitcoin miner is a huge, broken, unstable piece of shit.

(This was a rather controversial article posted on Buttcoin.org and became quite popular, even moving to the top of /bitcoin. It's since been mysteriously edited on the site [maybe by g-g-g-ghosts!] so it's being reposted here for posterity's sake. Some numbers may be off by now, but it was all accurate at the time of posting.)
Butterfly Labs has a long and horrible history with their mining rigs. They started taking pre-orders over a year ago, with a ship time sometime in late July. After numerous delays in production, shipping problems and general incompetence, the only thing they’ve managed to get out the door are some of their tiniest miners, the Jalapenos. And those mainly ended up in the hands of reviewers and blogs in order to keep pumping the Butterfly Labs hype train and securing millions of dollars of pre-orders still in limbo.Lucky BFL forums user Luke-JR however scored a sweet Mini Rig from Butterfly Labs (it’s just a coincidence he’s a driver developer for them I’m sure). This rig was originally promised to produce 1500 GH/s hashing power at 1500 watts for $30,000, but has since seen it’s hashing power slashed to a third of what was promised and it’s power consumption increased 75%, now just offer 500 GH/s at 2400 watts. They’ve promised to make good on pre-order buy sending out 3 rigs to match the initial hashing rate, so now it’s only 1500 GH/s at 6900 watts, a reduction in GH/Watt by a factor of 5.
So what does $22,484 buy you? Take a look!
Minirig is here! Today, my Minirig arrived.
http://i.imgur.com/Yp0WPvE.jpg
FedEx apparently dropped it somewhere along the way, and the weakest part of the case, the thin metal part around the back of the PSU, broke.
http://i.imgur.com/lFcOHxP.jpg
I’m not sure how sturdy the back side was supposed to be, but its two pieces aren’t quite together either.
http://i.imgur.com/AVttcOt.jpg
The power supplies (EVGA 1500W) also created havoc interfering with the neutral on the power line. This disrupted X10 communication significantly enough that the pool overflowed because the system controlling it was unable to turn off the pump. Workaround: This PSU supports 240V, so we rewired the outlet. 240V does not use neutral, so now all should be okay.
Edit: 240V workaround is only partial. Still having problems
But the good news is, it all seems to be working for the most part.
Next up, installing it in the window so the heat goes outside
A twenty two thousand dollar box of electronics that is broken out of the box, that required the guy to do a sketchy electrical workaround to get partially working, that he is going to install in a window… and he’s happy about it?
In case you didn’t notice it, the delivered unit is different than the picture on the website. They had to install 2 power supplies instead of 1 and had to modify the case to fit. Also, if you didn’t notice, the LCD/Phone thingy in the front has been replaced by … a piece of cardboard spray painted black. Wonderful.
You could maybe chalk this up to a careless Fedex postman, but when you’re shipping something that costs as much as a mid-sized sedan, how bought putting a little more effort into packing? Dell and HP can ship bigger and heavier servers across the world without this kind of problem.
The unit had to hit its huge power draw increase by putting dual EVGA consumer grade power supplies in the unit. We’re talking almost a 75 amp load (6*1500/120), disregarding power factor. He could very well overload the circuit panel and trip the main breaker for the house.
Let’s take a look inside this guy.
This is from an earlier version of the Minirig (note the single power supply) This is apparently from an earlier FPGA but it will give you a good glimpse at what kind of craftsmanship you can expect from a computer that is half the average household income in the United States.
Consumer grade PSU and cheap USB hubs glued to the inside case.
Electrical tape and random velcro glued to the insides
A closer look at the USB hubs. Plugs are hot glued to stay secured.
Electrical tape everywhere, splices and voided hardware are the theme.
You can view the entire album here.
Despite all that, this thing can still mine bitcoins and it should be profitable. Keep in ind that many people jumped in on the preorders a year ago when bitcoins were still hovering around $6.50 per. Meaning customers paid 1562 bitcoins for that particular piece of shit, which at today’s value is $156,200. Aston martin money. How long will it take them to make their money back (as apposed to just hanging on to them)? If the difficulty didn’t change, they would make 37 bitcoins a day and recoup the initial investment in 124 days. Difficulty is jumping pretty much 20% every 12 days or so, so in the next week before adjustment, they’ll make 259, the next 12 days 369, the next 12 days 312, then 256, then 213, etc.
So by day 127, they’ll be halfway to breaking even, but by day 151 they’ll be making less than 5 bitcoins a day, and even if difficulty stopped rising at that point(which it won’t), it would take another 435 days for a total of 586 days to break even. If difficulty kept rising at the same pace, by day 200 they’d be making 2.4 bitcoins per day, and it would take 1024 days to break even with no difficulty increase. Assuming 25 cents per kw/h, and $100 a bitcoin, it would cost 0.43 of a bitcoin per day in electricity which means the unit would no longer be profitable on a power usage basis by day 307, at which point it will have produced 2620 bitcoins.
Bear in mind this is only for the first few units, and that’s running 24/7 pumping out around 24,000 BTU, so yes, medical bills from heat stroke will be on top of that.
But Alas, the chips don’t run nearly as well as they’re supposed to, frequently running too hot and giving multiple hardware failures. Coindesk noted in one of the first ever runs of the Minirig by hosting provide gigavps that it was running much too hot and erroring out.
At the time of posting, gigavps warned that the unit would be repeatedly shut down while ckolivas, who was assisting, modified the machine’s software to optimise performance. After some tweaking, the device was said to have been left to run continuously for two hours, and was shown to have an average hash rate of 478.1 GH/s. As you can see in the table below, ASIC number four (of a total of eight hashing chips) ran significantly hotter (86 degrees) and consequently gave the highest hardware (HW) error rate.
http://i.imgur.com/q3iGrnb.jpg
So, what happens if you just decide you don’t want this, you don’t want to wait over a year to get a $22,000 broken piece of shit? Nothing, because BFL won’t let you cancel your preorder because they’re now “shipping”, i.e. they sent out one unit to their own company shill.
http://i.imgur.com/0p3Up03.jpg
Which is of course illegal regardless of what Butterfly Labs may say.
So in summary: Don’t buy anything from Butterfly Labs … ever.
submitted by borderpatrol to Buttcoin [link] [comments]

Any Halfway Reputable ASIC Miner Retailers?

I'm interested in purchasing a small ASIC Miner for the sake of having some stake in the Bitcoin network other than just HODLing, reading the news, and hoping a merchant I use will actually start accepting Bitcoin.
Poking around on the Internet, I haven't found any ASIC retailers that looked remotely credible. The reviews of Butterfly Labs are terrible, taking months or years to ship products, and everything they listed was out of stock. The Antminer ASICs I saw on bitmaintech.com were far more than I was looking to spend. Other websites looked sketchy at best. I've read several reviews of people who got ripped off, or waited months for their products to ship.
I'm not under any delusion of making my money back. But I'm not opposed to putting a few hundred dollars into an ASIC that outputs a few hundred GH/s and uses less than 30 kwh/day in power... if it is likely to actually show up.
Any thoughts or recommendations on where to look?
submitted by Osowp95 to Bitcoin [link] [comments]

Gumtree and bitCoin :)

Basically I wanted to sell my ASIC miner on gumtree. but my Add kept removed from the site. so I have asked them why. here is a transcript of the chat :)
http://puu.sh/54I2b/20db0c8979.png
• Rossana P: Hello, you are chatting with Rossana, how can I help? Kindly provide your ad id or email address if you haven’t already provided these details on the pre-chat form.
• You: Hi there, i have question regarding my add which has been removed
• You: Ive checked the allowed items on your gumtree : http://gumtree.force.com/Help/articles/General_Information/Items-not-allowed-on-GumtreeYou: and cannot find anything regarding my product that i wanted to sell
• Rossana P: Let me take a look at that for youYou: yes please
• Rossana P: Your ad was removed as we do not allow bit coins and other online points to be sold. Therefore items that contain this are not allowed
• Rossana P: are you there?
• You: sorryYou: yes
• You: it is not bitcoin
• You: its a device which can be purchased from your sister website ebay.
• You: REf: http://www.ebay.co.uk/itm/Butterfly-Labs-BitForce-60-GH-s-BFL-ASIC-Miner-In-UK-/271306181008?pt=UK_Computing_Other_Computing_Networking&hash=item3f2b1bc990You: it is listed as computing and other computing hardware
• Rossana P: let me check for you
• You: sure!
• Rossana P: I have looked into this for you and as you can receive bitcoins with the device and we do not allow bitcoins, we cannot allow your item
• Rossana P: I apologise for any inconvenience caused
• You: This product does not explicitly receives bitcoin. it is a sha256 processor which designed to perform calculations. having said that it can be used for bitcoin calculations.
• You: you are allowing computer to be sold, bit coins can be gained from computers too
• Rossana P: Yes, however as it can be used for bit coins we do not allow it. I apologise for the inconvenience caused. We will gladly allow other ads posted by you however in this case we cannot
• You: may i know the difference between allowing computers and not allowing ASIC devices?
• You: just to inform you.. Mobile phones could be used to produce bit coins
• Rossana P: I can imagine that this can be frustrating to encounter however we cannot allow your ad. I will forward on your feedback
• You: You took the time to give me an answer for which I didn't questioned.
• You: Computers, mobile phones, graphic cards can be used to gain bitcoins.. why would you restrict ASIC devices only?
• Rossana P: these are our posting rules and as this devices can be used for bit coins we do not allow it.You:http://gumtree.force.com/Help/articles/General_Information/Items-not-allowed-on-GumtreeYou: is your restriction. could you please point me out where exactly i can find about this device?You: on your restriction list*
• Rossana P: The item is not named in the list however it can be related to virtual merchandise due to bit coins which we do not allow
• You: define merchandise.
• You: it has nothing to do with VIRTUAL merchandise
• You: it is an actual product which is capable of perform complex calculations. it can be used for mathematical purposes, educational purposes anything but calculations
• Rossana P: As advised these are our terms and conditions and we cannot allow you ad to go live as the item can be used for bit coins we do not allow. I apologise for any inconvenience caused and I can imagine that this can be frustrating , however this does not comply with our posting rules as advised by our policy review team, with whom I have consulted. for this reason I cannot advise you further or otherwise on the matter.You: would i be able to take legal action against you? because you haven't listed the item on your restriction list. And failing to give provide a correct statement.
• Rossana P: As advised we do not allow the ad as it can be used for bit coins which we do not allow. I cannot advise you further or otherwise on the matter, for that reason I will have to terminate this chat
And disconnected :D
submitted by xkrishx to Bitcoin [link] [comments]

How to: Mine Bitcoins with Raspberry Pi and Butterfly Labs Jalapeno Butterfly Labs 5 GH/s BF0005G Butterfly Labs 5 GH/s ASIC Bitcoin mining rig, the Jalapeno Butterfly Labs 50Gh/s ASIC Miner - Mining Overview Review

5. 600 GH Bitcoin Mining Card (NEWEST Model) This is Butterfly’s newest product and comes in two models of connectivity: USB 2.0 and PCI-Express. 600 GH/s nominal performance ( + / – 20% ) Butterfly Labs (BFL) is a company that creates Bitcoin mining hardware. One of the earliest bitcoin mining hardware manufacturers offering ASIC devices, Butterfly Labs have come under fire from bitcoin miners who have had to wait patiently due to lengthy production and delivery delays. The company is headquartered is located in Kansas, United States. When buying one of these, it is very important to compare these with other bitcoin mining options and the current mining difficulty. Currently (August 26, 2013) you will get mine about 0.0078 BTC per day for each GH/s you mine. This would be about 0.234 BTC per month per GH/s. Thus, this device will mine about 1.75 BTC (8 * 0.234) in the next Shortly after beginning to ship its FPGA miniRigs, Butterfly Labs announced the impending release of ASIC-based, 60 GH/s "SC Singles", as well as a 4.5 GH/s low-end product called "Jalapeno", and Butterfly Labs might well fit 5 Ghashes/sec into a small box that sits on a desk, but Hoskinson’s concern is around the largest product in its lineup: the 1,500 Ghash/sec Minirig unit, which was

[index] [10032] [6544] [20892] [31278] [14211] [14041] [13658] [24719] [16564] [27750]

How to: Mine Bitcoins with Raspberry Pi and Butterfly Labs Jalapeno

Check out my latest Raspberry Pi project using a Butterfly labs Jalapeno 5 Gh/s Bitcoin miner and a Raspberry Pi Model B running Raspbian. Buy a bitcoin mine... This is an overview of a Butterfly Labs 50 Gh/s mining rig mining in real time. It is mining sha-256 algorithm crypto coins and is stable at ~ 55 Gh/s using MinePeon on a Raspberry Pi. Currently ... The Butterfly Labs 5 GH/s Jalapeno. This is the small ASIC miner from Butterfly Labs. ... Butterfly Labs 5 GH/s ASIC Bitcoin Miner (Jalapeno) Review - Duration: 11:42. andrewesquivel 22,103 views. Butterfly Labs 5 GH/s ASIC Bitcoin Miner (Jalapeno) Review - Duration: ... Bitcoin mining mexico butterfly labs 10gh/s - Hackwise - Duration: 9:37. HackWise Recommended for you.

Flag Counter