11 Best Bitcoin Mining Software 2020 (Mac, Windows, Linux)

BFGMiner Garlicoin tutorial

Some people have been having trouble with BFGMiner for Garlicoin, so I made a tutorial. This will only work on a Unix-based shell.
I have been informed that the Pastebin may not be beginner-friendly, so I will help anyone who needs it.
Thanks to ChilledGrease for their help with making the tutorial.
  1. Download and extract http://www.digip.org/jansson/releases/jansson-2.10.tar.gz
  2. cd to the folder and run ./configure && make && make install
  3. Download and extract https://github.com/troydhanson/uthash/archive/master.zip
  4. Download and extract http://luke.dashjr.org/programs/bitcoin/files/bfgmine4.10.6/bfgminer-4.10.6.zip
  5. cd to the bfgminer folder and run env CFLAGS='-I../uthash-mastesrc' ./configure --enable-opencl --enable-scrypt --enable-cpumining, assuming uthash-master is the directory you extracted in part 3.
  6. Run make && make install. If it says you do not have permission to do something, run sudo make install and enter your password.
  7. Set up garlicoind and its config. There is a tutorial here.
  8. Run garlicoind.
  9. Run this command: bfgminer --scrypt -o localhost:42070 -u [username in garlicoind config] -p [password] --no-longpoll --no-stratum --coinbase-addr [your address] -S opencl:auto
Citations:
https://askubuntu.com/a/386372
https://bitcointalk.org/index.php?topic=1260729.0
Edit: Adding citations section as well as CPU mining for those of you who don't want to or can't use a GPU.
Edit 2: Clarifications
Edit 3: Removed CPU mining as I cannot currently get it to work.
Edit 4: I don't want to make a 100000 character long post so I'm not gonna put this anymore.
Edit again: I can't get BFGMiner to work with the new scrypt:2048 algorithm, so this will not work for the time being.
submitted by U8336Tea to garlicoin [link] [comments]

(Updated) [Staking] Reddcoin Core client GUI wallet on a Raspberry Pi Model 3B

Intro

This thread is an update to my first Reddcoin staking tutorial that was written 7 months ago.
 
The reason for the update
My Reddcoin Core software crashed and became unusable. My Raspberry Pi 3B would lag and freeze, I couldn't stake anymore.
 
Instead of just redoing everything the same way, I wanted to see if I could improve on 3 points:
 
The updates
 
If you would like to tip me
Writing a tutorial like this takes time and effort; tips are appreciated. My Reddcoin address: RqvdnNX5MTam855Y2Vudv7yVgtXdcYaQAW.
     

Overview

 

Steps

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
     

Video

https://www.youtube.com/watch?v=Snr5e8bzftI
This video shows how long it takes to start Reddcoin Core.   TL;DR:
     

Extra

Backup
Backup your wallet to prevent losing the RDDs in your wallet! There are two methods to backup, do both. Make new backups if you create a new receiving address!
 
 
   
Boot with only 1 USB drive plugged in:
Make sure only the USB drive (with the swap partition and data partition) is plugged in when you boot up your Raspberry Pi. This to make sure the swap partition (/dev/sda1) is recognized correctly.   If you boot up with multiple USB drives, Lubuntu might see the USB drive with the swap partition as the second drive (instead of the first drive), and ignore the 2 GB swap partition. If this happens, starting Reddcoin can render the Raspberry Pi unresponsive.
   
Connection issues If you have issues syncing the blockchain because you have 0 network connections, please follow the instructions in this thread.
   
Start Reddcoin Core easier
Run a shell script (.sh file), so you can start Reddcoin just by double clicking on an icon on your Desktop.
   
Minimization options
Adjust minimization options, so you can safely press on the X button (the close/exit button on the upper right corner).
   
RealVNC VNC Viewer (client) and VNC Connect (server): To remote connect to the Raspberry Pi, I use VNC Viewer ad VNC Connect from RealVNC.
 
   
Chromium as browser: The updates break Firefox, the browser crashes when you try to run it. Install another browser, Chromium, to solve this issue.
   
Updates / Upgrades
If Software Updater shows up and tells you that there is updated software available, do not install the updates using Software Updater. Use LXTerminal to update Lubuntu.  
     

Credits:

   
Credits in previous tutorial:
submitted by Yavuz_Selim to reddCoin [link] [comments]

How to Mine BiblePay on Linux

This guide is outdated, please refer to:
https://wiki.biblepay.org/POBH_Setup
https://wiki.biblepay.org/PODC_Setup
 
 
 
 
 
 
 
 
IMPORTANT - Evolution Upgrade:
Quick Start https://wiki.biblepay.org/Quick_Start
Evolution Upgrade Information https://wiki.biblepay.org/Evolution_Upgrade
Getting Started with Evolution https://wiki.biblepay.org/Getting_Started_with_Evolution
Generic Smart Contracts https://wiki.biblepay.org/Generic_Smart_Contracts
What is BiblePay Evolution? https://www.reddit.com/BiblePay/comments/bifvpk/biblepay_evolution_what_is_it/
Recommend 2GB RAM or can get stuck compiling (if 1GB RAM can use Swap File) Use Ubuntu 16.04
INFO
https://github.com/biblepay/biblepay-evolution/blob/masteBuildBiblePay.txt
INSTALL COMMANDS
apt-get install build-essential libtool autotools-dev automake pkg-config libssl-dev libevent-dev bsdmainutils apt-get install libboost-system-dev libboost-filesystem-dev libboost-chrono-dev libboost-program-options-dev libboost-test-dev libboost-thread-dev apt-get install libqt5gui5 libqt5core5a libqt5dbus5 qttools5-dev qttools5-dev-tools libprotobuf-dev protobuf-compiler apt-get install git apt-get install curl build-essential libtool autotools-dev automake pkg-config python3 bsdmainutils cmake sudo add-apt-repository ppa:bitcoin/bitcoin sudo apt-get update sudo apt-get install libdb4.8-dev libdb4.8++-dev git clone http://github.com/biblepay/biblepay-evolution prefix=x86_64-pc-linux-gnu cd biblepay-evolution/depends make -j4 # Choose a good -j value, depending on the number of CPU cores available cd .. ./autogen.sh #Note: if echo `pwd` does not return your working directory, replace it with your working directory such as /biblepay-evolution/ ./configure --prefix `pwd`/depends/x86_64-pc-linux-gnu make # See more here: #https://github.com/biblepay/biblepay-evolution/blob/mastedoc/build-unix.md 

SWAP FILE
NOTE: if server is 1GB RAM, before running last command "sudo make", set up a swap file
free #check if swap is 0 dd if=/dev/zero of=/vaswap.img bs=1024k count=1000 mkswap /vaswap.img swapon /vaswap.img free #check if swap is 1024 sudo make 

RUN COMMAND LINE
cd src ./biblepayd -daemon 
OR
RUN GUI
Your GUI program will be located in: /biblepay-evolution/src/qt
./biblepay-qt 
You can also run it in the background (to free up your terminal) if you call it with:
./biblepay-qt & 
To start mining, instructions are the same as for Windows: Go to Tools -> Debug Console
Execute this command (to start mining with 8 threads)
setgenerate true 8 
From there you can use all other commands such as getmininginfo, getwalletinfo, etc. Execute help command to get the list of all available commands.
Note: GUI will be built automatically only if you meet the requirements for qt library, i.e. make sure you ran this line before compiling:
sudo apt-get install libqt5gui5 libqt5core5a libqt5dbus5 qttools5-dev qttools5-dev-tools libprotobuf-dev protobuf-compiler 
BIBLEPAY is now Running!

SETUP CONFIG
Stop BiblePay and set up the config file to get starting nodes to sync with and enable mining:
./biblepay-cli stop cd ~/.biblepayevolution/ vi biblepay.conf addnode=node.biblepay.org gen=1 genproclimit=1 
Escape Key + : (Colon Key) + w + q + Enter (saves file and quits)

addnode --- adds a node to the list of nodes to connect to gen=1 --- turns on mining genproclimit --- sets number of threads to use when mining

Run BiblePay again and fully sync with network
cd ../biblepay-evolution/src ./biblepayd -daemon ./biblepay-cli getinfo 

USEFUL COMMANDS
./biblepay-cli help ./biblepay-cli getaccountaddress "" ./biblepay-cli getinfo ./biblepay-cli getmininginfo ./biblepay-cli setgenerate true 8 ./biblepay-cli sendtoaddress "insertAddressHere" 777 "" "" true ./biblepay-cli stop ./biblepayd -daemon top #CPU usage q to quit 

MINING THREADS: To change number of threads to use up for mining
a. Edit home/yourusername/.biblepayevolution/biblepay.conf file:
genproclimit=X 
and restart BiblePay -or- b. Menu >> Tools >> Debug Console >> Type command:
setgenerate true X 
(Replace X with number of threads Use top command to view CPU usage)

POOL
NOTE: To use the pool you must now use the external miner, not the wallet miner https://whitewalr.us/2019/biblepay-nomp-pool-mining.html
  1. Set up an account on pool website: https://pool.biblepay.org/
  2. Create Worker Username(s) - Workers tab >>> Add
  3. Enable pool and add Worker Username in ~/.biblepayevolution/biblepay.conf file, add these lines and save:
    pool=https://pool.biblepay.org workerid=insertWorkerUsernameHere
4. Restart BiblePay
./biblepay-cli stop ./biblepayd -daemon 
Setup Auto-Withdraw Navigate to Account >>> Account Settings >>> Verify your BBP Receiving Address >>> Click Authorize-Auto-Withdraws

UPDATE:

### Turn off/stop BiblePay
cd /home/yourname/biblepay-evolution/src ./biblepay-cli stop 

### Pull down latest Biblepay code and build it
cd /home/yourname/biblepay-evolution git pull origin master sudo make 

### Turn BiblePay back on and check version number
cd src ./biblepayd -daemon ./biblepay-cli getinfo ./biblepay-cli setgenerate true 8 

UPDATE IN ONE COMMAND:
./biblepay-evolution/src/biblepay-cli stop ; cd && cd biblepay-evolution/ && git pull origin master && sudo make && cd src && ./biblepayd -daemon && sleep 90 && ./biblepay-cli getmininginfo 
Note: the ";" says do this after, regardless of the outcome Note: && says do this after only if previous command finished with no errors

SPEED UP COMPILE:
To speed up the compile time, add -j4 or -j8 after make. This way it compiles using 4 or 8 threads instead of just 1.
./configure LDFLAGS="-L${BDB_PREFIX}/lib/" CPPFLAGS="-I${BDB_PREFIX}/include/" sudo make -j8 
Reference: http://www.linux-databook.info/?page_id=2319

RSYNC stop biblepay from your nodes compile on your fastest machine then rsync with your machines only src folder is required
rsync -avuz /root/biblepay-evolution/src/ [email protected]:/root/biblepay-evolution/src/ 
https://stackoverflow.com/questions/3299951/how-to-pass-password-for-rsync-ssh-command https://www.thegeekstuff.com/2008/11/3-steps-to-perform-ssh-login-without-password-using-ssh-keygen-ssh-copy-id/
people make cron jobs and rsync automatically

OUTDATED

Unofficial Bash Script
https://gist.github.com/anonymous/d1c1d35e3c8f67f5fb2e204479fa5c6b

Official Ubuntu Package
https://launchpad.net/~biblepay-official

Unofficial Ubuntu Package
https://www.reddit.com/BiblePay/comments/7rwqqs/unofficial_ubuntu_packages_available/

Unofficial Mine in One Line
https://www.reddit.com/BiblePay/comments/7ryuk1/mine_in_one_line/
NOTE: DONT RUN ON A COMPUTER WITH COINS -- THIS IS A CLEAN INSTALL SCRIPT

COMPILE WITHOUT GUI: https://bitcointalk.org/index.php?topic=2042657.msg21878317#msg21878317 https://bitcointalk.org/index.php?topic=2042657.msg21878389#msg21878389
ADVANCED:

DOCKER IMAGES (NOTE: I havent tested these, use at your own risk) https://hub.docker.com/gagaha/biblepay/ https://hub.docker.com/cryptozero/biblepay-opt/
submitted by togoshige to BiblePay [link] [comments]

Antminer S9 no longer hashing?

Good morning folks,
I have an Antminer S9 that has performed flawlessly. After I moved it to a better location, I noticed that it no longer seems to be working. The green light is flashing, but it doesn't seem to be hashing to my pool (Nicehash).
I'm fairly new to Bitcoining mining and can't make sense of some of the information on my status screen. Before I jump into Bitmain support, I was wondering if anyone could clue me in as to what the problem might be.
https://s15.postimg.cc/i0n5qsyoInked_Capture_LI.jpg
I'll post my Kernal Log here.
Thank you in advance!!!
KERNAL LOG: [ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 3.14.0-xilinx-ge8a2f71-dirty ([email protected]) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #82 SMP PREEMPT Tue May 16 19:49:53 CST 2017
[ 0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine model: Xilinx Zynq
[ 0.000000] cma: CMA: reserved 128 MiB at 27800000
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] On node 0 totalpages: 258048
[ 0.000000] free_area_init_node: node 0, pgdat c0740a40, node_mem_map e6fd8000
[ 0.000000] Normal zone: 1520 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 194560 pages, LIFO batch:31
[ 0.000000] HighMem zone: 496 pages used for memmap
[ 0.000000] HighMem zone: 63488 pages, LIFO batch:15
[ 0.000000] PERCPU: Embedded 8 pages/cpu @e6fc0000 s9088 r8192 d15488 u32768
[ 0.000000] pcpu-alloc: s9088 r8192 d15488 u32768 alloc=8*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 256528
[ 0.000000] Kernel command line: noinitrd mem=1008M console=ttyPS0,115200 root=ubi0:rootfs ubi.mtd=1 rootfstype=ubifs rw rootwait
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Memory: 884148K/1032192K available (5032K kernel code, 283K rwdata, 1916K rodata, 204K init, 258K bss, 148044K reserved, 253952K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc06d1374 (6949 kB)
[ 0.000000] .init : 0xc06d2000 - 0xc0705380 ( 205 kB)
[ 0.000000] .data : 0xc0706000 - 0xc074cf78 ( 284 kB)
[ 0.000000] .bss : 0xc074cf84 - 0xc078d9fc ( 259 kB)
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] ps7-slcr mapped to f0004000
[ 0.000000] zynq_clock_init: clkc starts at f0004100
[ 0.000000] Zynq clock init
[ 0.000015] sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 3298534883328ns
[ 0.000308] ps7-ttc #0 at f0006000, irq=43
[ 0.000618] Console: colour dummy device 80x30
[ 0.000658] Calibrating delay loop... 1325.46 BogoMIPS (lpj=6627328)
[ 0.040207] pid_max: default: 32768 minimum: 301
[ 0.040436] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.040459] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.042612] CPU: Testing write buffer coherency: ok
[ 0.042974] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.043036] Setting up static identity map for 0x4c4b00 - 0x4c4b58
[ 0.043263] L310 cache controller enabled
[ 0.043282] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x72760000, Cache size: 512 kB
[ 0.121037] CPU1: Booted secondary processor
[ 0.210227] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.210357] Brought up 2 CPUs
[ 0.210376] SMP: Total of 2 processors activated.
[ 0.210385] CPU: All CPU(s) started in SVC mode.
[ 0.211051] devtmpfs: initialized
[ 0.213481] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[ 0.214724] regulator-dummy: no parameters
[ 0.223736] NET: Registered protocol family 16
[ 0.226067] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.228361] cpuidle: using governor ladder
[ 0.228374] cpuidle: using governor menu
[ 0.235908] syscon f8000000.ps7-slcr: regmap [mem 0xf8000000-0xf8000fff] registered
[ 0.237440] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[ 0.237453] hw-breakpoint: maximum watchpoint size is 4 bytes.
[ 0.237572] zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xf0080000
[ 0.259435] bio: create slab at 0
[ 0.261172] vgaarb: loaded
[ 0.261915] SCSI subsystem initialized
[ 0.262814] usbcore: registered new interface driver usbfs
[ 0.262985] usbcore: registered new interface driver hub
[ 0.263217] usbcore: registered new device driver usb
[ 0.263743] media: Linux media interface: v0.10
[ 0.263902] Linux video capture interface: v2.00
[ 0.264150] pps_core: LinuxPPS API ver. 1 registered
[ 0.264162] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[[email protected]](mailto:[email protected])>
[ 0.264286] PTP clock support registered
[ 0.264656] EDAC MC: Ver: 3.0.0
[ 0.265719] Advanced Linux Sound Architecture Driver Initialized.
[ 0.268708] DMA-API: preallocated 4096 debug entries
[ 0.268724] DMA-API: debugging enabled by kernel config
[ 0.268820] Switched to clocksource arm_global_timer
[ 0.289596] NET: Registered protocol family 2
[ 0.290280] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.290375] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.290535] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.290612] TCP: reno registered
[ 0.290633] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.290689] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.290971] NET: Registered protocol family 1
[ 0.291346] RPC: Registered named UNIX socket transport module.
[ 0.291359] RPC: Registered udp transport module.
[ 0.291368] RPC: Registered tcp transport module.
[ 0.291376] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.291391] PCI: CLS 0 bytes, default 64
[ 0.291857] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[ 0.293945] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.295408] bounce pool size: 64 pages
[ 0.296323] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[ 0.296525] msgmni has been set to 1486
[ 0.297330] io scheduler noop registered
[ 0.297343] io scheduler deadline registered
[ 0.297385] io scheduler cfq registered (default)
[ 0.308358] dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-2364208
[ 0.308380] dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
[ 0.434378] e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 82, base_baud = 3124999) is a xuartps
[ 1.006815] console [ttyPS0] enabled
[ 1.011106] xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to f0068000
[ 1.018731] [drm] Initialized drm 1.1.0 20060810
[ 1.036029] brd: module loaded
[ 1.045494] loop: module loaded
[ 1.055163] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[ 1.060985] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[ 1.068779] libphy: XEMACPS mii bus: probed
[ 1.073341] ------------- phy_id = 0x3625e62
[ 1.078112] xemacps e000b000.ps7-ethernet: pdev->id -1, baseaddr 0xe000b000, irq 54
[ 1.087072] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.093912] ehci-pci: EHCI PCI platform driver
[ 1.101155] zynq-dr e0002000.ps7-usb: Unable to init USB phy, missing?
[ 1.107952] usbcore: registered new interface driver usb-storage
[ 1.114850] mousedev: PS/2 mouse device common for all mice
[ 1.120975] i2c /dev entries driver
[ 1.127946] zynq-edac f8006000.ps7-ddrc: ecc not enabled
[ 1.133474] cpufreq_cpu0: failed to get cpu0 regulator: -19
[ 1.139426] Xilinx Zynq CpuIdle Driver started
[ 1.144261] sdhci: Secure Digital Host Controller Interface driver
[ 1.150384] sdhci: Copyright(c) Pierre Ossman
[ 1.154700] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.161601] mmc0: no vqmmc regulator found
[ 1.165614] mmc0: no vmmc regulator found
[ 1.208845] mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
[ 1.217539] usbcore: registered new interface driver usbhid
[ 1.223054] usbhid: USB HID core driver
[ 1.227806] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
[ 1.234107] nand: Micron MT29F2G08ABAEAWP
[ 1.238074] nand: 256MiB, SLC, page size: 2048, OOB size: 64
[ 1.244027] Bad block table found at page 131008, version 0x01
[ 1.250251] Bad block table found at page 130944, version 0x01
[ 1.256303] 3 ofpart partitions found on MTD device pl353-nand
[ 1.262080] Creating 3 MTD partitions on "pl353-nand":
[ 1.267174] 0x000000000000-0x000002000000 : "BOOT.bin-env-dts-kernel"
[ 1.275230] 0x000002000000-0x00000b000000 : "angstram-rootfs"
[ 1.282582] 0x00000b000000-0x000010000000 : "upgrade-rootfs"
[ 1.291630] TCP: cubic registered
[ 1.294869] NET: Registered protocol family 17
[ 1.299597] Registering SWP/SWPB emulation handler
[ 1.305497] regulator-dummy: disabling
[ 1.309875] UBI: attaching mtd1 to ubi0
[ 1.836565] UBI: scanning is finished
[ 1.848221] UBI: attached mtd1 (name "angstram-rootfs", size 144 MiB) to ubi0
[ 1.855302] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 1.862063] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 1.868728] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 1.875605] UBI: good PEBs: 1152, bad PEBs: 0, corrupted PEBs: 0
[ 1.881586] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
[ 1.888693] UBI: max/mean erase counter: 4/1, WL threshold: 4096, image sequence number: 1134783803
[ 1.897736] UBI: available PEBs: 0, total reserved PEBs: 1152, PEBs reserved for bad PEB handling: 40
[ 1.906953] UBI: background thread "ubi_bgt0d" started, PID 1080
[ 1.906959] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 1.911038] ALSA device list:
[ 1.911042] No soundcards found.
[ 1.927420] UBIFS: background thread "ubifs_bgt0_0" started, PID 1082
[ 1.956473] UBIFS: recovery needed
[ 2.016970] UBIFS: recovery completed
[ 2.020709] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
[ 2.026635] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 2.035771] UBIFS: FS size: 128626688 bytes (122 MiB, 1013 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
[ 2.045653] UBIFS: reserved for root: 0 bytes (0 KiB)
[ 2.050693] UBIFS: media format: w4/r0 (latest is w4/r0), UUID B079DD56-06BB-4E31-8F5E-A6604F480DB2, small LPT model
[ 2.061987] VFS: Mounted root (ubifs filesystem) on device 0:11.
[ 2.069184] devtmpfs: mounted
[ 2.072297] Freeing unused kernel memory: 204K (c06d2000 - c0705000)
[ 2.920928] random: dd urandom read with 0 bits of entropy available
[ 3.318860]
[ 3.318860] bcm54xx_config_init
[ 3.928853]
[ 3.928853] bcm54xx_config_init
[ 7.929682] xemacps e000b000.ps7-ethernet: Set clk to 124999998 Hz
[ 7.935787] xemacps e000b000.ps7-ethernet: link up (1000/FULL)
[ 22.563181] In axi fpga driver!
[ 22.566260] request_mem_region OK!
[ 22.569676] AXI fpga dev virtual address is 0xf01fe000
[ 22.574751] *base_vir_addr = 0x8c510
[ 22.590723] In fpga mem driver!
[ 22.593791] request_mem_region OK!
[ 22.597361] fpga mem virtual address is 0xf3000000
[ 23.408156]
[ 23.408156] bcm54xx_config_init
[ 24.038071]
[ 24.038071] bcm54xx_config_init
[ 28.038487] xemacps e000b000.ps7-ethernet: Set clk to 124999998 Hz
[ 28.044593] xemacps e000b000.ps7-ethernet: link up (1000/FULL)
This is XILINX board. Totalram: 1039794176
Detect 1GB control board of XILINX
DETECT HW version=0008c510
miner ID : 8118b4c610358854
Miner Type = S9
AsicType = 1387
real AsicNum = 63
use critical mode to search freq...
get PLUG ON=0x000000e0
Find hashboard on Chain[5]
Find hashboard on Chain[6]
Find hashboard on Chain[7]
set_reset_allhashboard = 0x0000ffff
Check chain[5] PIC fw version=0x03
Check chain[6] PIC fw version=0x03
Check chain[7] PIC fw version=0x03
chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[5] has freq in PIC and will jump over...
Chain[5] has core num in PIC
Chain[5] ASIC[15] has core num=5
Check chain[5] PIC fw version=0x03
chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[6] has freq in PIC and will jump over...
Chain[6] has core num in PIC
Chain[6] ASIC[17] has core num=8
Check chain[6] PIC fw version=0x03
chain[7]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[7] has freq in PIC and will jump over...
Chain[7] has core num in PIC
Chain[7] ASIC[8] has core num=13
Chain[7] ASIC[9] has core num=11
Chain[7] ASIC[13] has core num=11
Chain[7] ASIC[19] has core num=14
Chain[7] ASIC[30] has core num=6
Chain[7] ASIC[32] has core num=1
Chain[7] ASIC[42] has core num=2
Chain[7] ASIC[55] has core num=1
Chain[7] ASIC[57] has core num=2
Check chain[7] PIC fw version=0x03
get PIC voltage=108 on chain[5], value=880
get PIC voltage=74 on chain[6], value=900
get PIC voltage=108 on chain[7], value=880
set_reset_allhashboard = 0x00000000
chain[5] temp offset record: 62,0,0,0,0,0,35,28
chain[5] temp chip I2C addr=0x98
chain[5] has no middle temp, use special fix mode.
chain[6] temp offset record: 62,0,0,0,0,0,35,28
chain[6] temp chip I2C addr=0x98
chain[6] has no middle temp, use special fix mode.
chain[7] temp offset record: 62,0,0,0,0,0,35,28
chain[7] temp chip I2C addr=0x98
chain[7] has no middle temp, use special fix mode.
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
CRC error counter=0
set command mode to VIL
--- check asic number
After Get ASIC NUM CRC error counter=0
set_baud=0
The min freq=700
set real timeout 52, need sleep=379392
After TEST CRC error counter=0
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
search freq for 1 times, completed chain = 3, total chain num = 3
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
restart Miner chance num=2
waiting for receive_func to exit!
waiting for pic heart to exit!
bmminer not found= 1643 root 0:00 grep bmminer
bmminer not found, restart bmminer ...
This is user mode for mining
Detect 1GB control board of XILINX
Miner Type = S9
Miner compile time: Fri Nov 17 17:57:49 CST 2017 type: Antminer S9set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
set_reset_allhashboard = 0x0000ffff
miner ID : 8118b4c610358854
set_reset_allhashboard = 0x0000ffff
Checking fans!get fan[2] speed=6120
get fan[2] speed=6120
get fan[2] speed=6120
get fan[2] speed=6120
get fan[2] speed=6120
get fan[2] speed=6120
get fan[5] speed=13440
get fan[2] speed=6120
get fan[5] speed=13440
get fan[2] speed=6120
get fan[5] speed=13440
chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
Chain[J6] has backup chain_voltage=880
Chain[J6] test patten OK temp=-126
Check chain[5] PIC fw version=0x03
chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
Chain[J7] has backup chain_voltage=900
Chain[J7] test patten OK temp=-120
Check chain[6] PIC fw version=0x03
chain[7]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
Chain[J8] has backup chain_voltage=880
Chain[J8] test patten OK temp=-125
Check chain[7] PIC fw version=0x03
Chain[J6] orignal chain_voltage_pic=108 value=880
Chain[J7] orignal chain_voltage_pic=74 value=900
Chain[J8] orignal chain_voltage_pic=108 value=880
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
Chain[J6] has 63 asic
Chain[J7] has 63 asic
Chain[J8] has 63 asic
Chain[J6] has core num in PIC
Chain[J6] ASIC[15] has core num=5
Chain[J7] has core num in PIC
Chain[J7] ASIC[17] has core num=8
Chain[J8] has core num in PIC
Chain[J8] ASIC[8] has core num=13
Chain[J8] ASIC[9] has core num=11
Chain[J8] ASIC[13] has core num=11
Chain[J8] ASIC[19] has core num=14
Chain[J8] ASIC[30] has core num=6
Chain[J8] ASIC[32] has core num=1
Chain[J8] ASIC[42] has core num=2
Chain[J8] ASIC[55] has core num=1
Chain[J8] ASIC[57] has core num=2
miner total rate=13999GH/s fixed rate=13500GH/s
read PIC voltage=940 on chain[5]
Chain:5 chipnum=63
Chain[J6] voltage added=0.2V
Chain:5 temp offset=0
Chain:5 base freq=487
Asic[ 0]:618
Asic[ 1]:631 Asic[ 2]:681 Asic[ 3]:618 Asic[ 4]:631 Asic[ 5]:681 Asic[ 6]:618 Asic[ 7]:631 Asic[ 8]:675
Asic[ 9]:618 Asic[10]:631 Asic[11]:681 Asic[12]:631 Asic[13]:637 Asic[14]:606 Asic[15]:487 Asic[16]:637
Asic[17]:675 Asic[18]:618 Asic[19]:637 Asic[20]:675 Asic[21]:631 Asic[22]:650 Asic[23]:687 Asic[24]:631
Asic[25]:537 Asic[26]:687 Asic[27]:631 Asic[28]:587 Asic[29]:687 Asic[30]:612 Asic[31]:650 Asic[32]:687
Asic[33]:631 Asic[34]:650 Asic[35]:687 Asic[36]:631 Asic[37]:662 Asic[38]:693 Asic[39]:631 Asic[40]:662
Asic[41]:662 Asic[42]:543 Asic[43]:668 Asic[44]:693 Asic[45]:568 Asic[46]:675 Asic[47]:700 Asic[48]:631
Asic[49]:568 Asic[50]:700 Asic[51]:631 Asic[52]:625 Asic[53]:700 Asic[54]:631 Asic[55]:675 Asic[56]:662
Asic[57]:631 Asic[58]:662 Asic[59]:687 Asic[60]:631 Asic[61]:681 Asic[62]:700
Chain:5 max freq=700
Chain:5 min freq=487
read PIC voltage=940 on chain[6]
Chain:6 chipnum=63
Chain[J7] voltage added=0.1V
Chain:6 temp offset=0
Chain:6 base freq=687
Asic[ 0]:650
Asic[ 1]:650 Asic[ 2]:650 Asic[ 3]:650 Asic[ 4]:650 Asic[ 5]:650 Asic[ 6]:650 Asic[ 7]:650 Asic[ 8]:650
Asic[ 9]:650 Asic[10]:650 Asic[11]:650 Asic[12]:650 Asic[13]:650 Asic[14]:650 Asic[15]:650 Asic[16]:650
Asic[17]:650 Asic[18]:650 Asic[19]:650 Asic[20]:650 Asic[21]:650 Asic[22]:650 Asic[23]:650 Asic[24]:650
Asic[25]:650 Asic[26]:656 Asic[27]:656 Asic[28]:656 Asic[29]:656 Asic[30]:656 Asic[31]:656 Asic[32]:656
Asic[33]:656 Asic[34]:656 Asic[35]:656 Asic[36]:656 Asic[37]:656 Asic[38]:656 Asic[39]:656 Asic[40]:656
Asic[41]:656 Asic[42]:656 Asic[43]:656 Asic[44]:656 Asic[45]:656 Asic[46]:656 Asic[47]:656 Asic[48]:656
Asic[49]:656 Asic[50]:656 Asic[51]:656 Asic[52]:656 Asic[53]:656 Asic[54]:656 Asic[55]:656 Asic[56]:656
Asic[57]:656 Asic[58]:656 Asic[59]:656 Asic[60]:656 Asic[61]:656 Asic[62]:656
Chain:6 max freq=656
Chain:6 min freq=650
read PIC voltage=940 on chain[7]
Chain:7 chipnum=63
Chain[J8] voltage added=0.2V
Chain:7 temp offset=0
Chain:7 base freq=637
Asic[ 0]:656
Asic[ 1]:656 Asic[ 2]:656 Asic[ 3]:656 Asic[ 4]:656 Asic[ 5]:656 Asic[ 6]:656 Asic[ 7]:656 Asic[ 8]:637
Asic[ 9]:637 Asic[10]:656 Asic[11]:656 Asic[12]:656 Asic[13]:637 Asic[14]:656 Asic[15]:662 Asic[16]:662
Asic[17]:662 Asic[18]:662 Asic[19]:637 Asic[20]:662 Asic[21]:662 Asic[22]:662 Asic[23]:662 Asic[24]:662
Asic[25]:662 Asic[26]:662 Asic[27]:662 Asic[28]:662 Asic[29]:662 Asic[30]:637 Asic[31]:662 Asic[32]:662
Asic[33]:662 Asic[34]:662 Asic[35]:662 Asic[36]:662 Asic[37]:662 Asic[38]:662 Asic[39]:662 Asic[40]:662
Asic[41]:662 Asic[42]:650 Asic[43]:662 Asic[44]:662 Asic[45]:662 Asic[46]:662 Asic[47]:662 Asic[48]:662
Asic[49]:662 Asic[50]:662 Asic[51]:662 Asic[52]:662 Asic[53]:662 Asic[54]:662 Asic[55]:650 Asic[56]:662
Asic[57]:650 Asic[58]:662 Asic[59]:662 Asic[60]:662 Asic[61]:662 Asic[62]:662
Chain:7 max freq=662
Chain:7 min freq=637
Miner fix freq ...
read PIC voltage=940 on chain[5]
Chain:5 chipnum=63
Chain[J6] voltage added=0.2V
Chain:5 temp offset=0
Chain:5 base freq=487
Asic[ 0]:618
Asic[ 1]:631 Asic[ 2]:650 Asic[ 3]:618 Asic[ 4]:631 Asic[ 5]:656 Asic[ 6]:618 Asic[ 7]:631 Asic[ 8]:656
Asic[ 9]:618 Asic[10]:631 Asic[11]:656 Asic[12]:631 Asic[13]:637 Asic[14]:606 Asic[15]:487 Asic[16]:637
Asic[17]:656 Asic[18]:618 Asic[19]:637 Asic[20]:656 Asic[21]:631 Asic[22]:650 Asic[23]:656 Asic[24]:631
Asic[25]:537 Asic[26]:656 Asic[27]:631 Asic[28]:587 Asic[29]:656 Asic[30]:612 Asic[31]:650 Asic[32]:656
Asic[33]:631 Asic[34]:650 Asic[35]:656 Asic[36]:631 Asic[37]:656 Asic[38]:656 Asic[39]:631 Asic[40]:656
Asic[41]:656 Asic[42]:543 Asic[43]:656 Asic[44]:656 Asic[45]:568 Asic[46]:656 Asic[47]:656 Asic[48]:631
Asic[49]:568 Asic[50]:656 Asic[51]:631 Asic[52]:625 Asic[53]:656 Asic[54]:631 Asic[55]:656 Asic[56]:656
Asic[57]:631 Asic[58]:656 Asic[59]:656 Asic[60]:631 Asic[61]:656 Asic[62]:656
Chain:5 max freq=656
Chain:5 min freq=487
read PIC voltage=940 on chain[6]
Chain:6 chipnum=63
Chain[J7] voltage added=0.1V
Chain:6 temp offset=0
Chain:6 base freq=687
Asic[ 0]:631
Asic[ 1]:631 Asic[ 2]:631 Asic[ 3]:631 Asic[ 4]:631 Asic[ 5]:631 Asic[ 6]:631 Asic[ 7]:631 Asic[ 8]:631
Asic[ 9]:631 Asic[10]:631 Asic[11]:631 Asic[12]:631 Asic[13]:631 Asic[14]:631 Asic[15]:631 Asic[16]:631
Asic[17]:631 Asic[18]:631 Asic[19]:631 Asic[20]:631 Asic[21]:631 Asic[22]:631 Asic[23]:631 Asic[24]:631
Asic[25]:631 Asic[26]:631 Asic[27]:631 Asic[28]:631 Asic[29]:631 Asic[30]:631 Asic[31]:631 Asic[32]:631
Asic[33]:631 Asic[34]:631 Asic[35]:637 Asic[36]:637 Asic[37]:637 Asic[38]:637 Asic[39]:637 Asic[40]:637
Asic[41]:637 Asic[42]:637 Asic[43]:637 Asic[44]:637 Asic[45]:637 Asic[46]:637 Asic[47]:637 Asic[48]:637
Asic[49]:637 Asic[50]:637 Asic[51]:637 Asic[52]:637 Asic[53]:637 Asic[54]:637 Asic[55]:637 Asic[56]:637
Asic[57]:637 Asic[58]:637 Asic[59]:637 Asic[60]:637 Asic[61]:637 Asic[62]:637
Chain:6 max freq=637
Chain:6 min freq=631
read PIC voltage=940 on chain[7]
Chain:7 chipnum=63
Chain[J8] voltage added=0.2V
Chain:7 temp offset=0
Chain:7 base freq=637
Asic[ 0]:637
Asic[ 1]:637 Asic[ 2]:637 Asic[ 3]:637 Asic[ 4]:637 Asic[ 5]:637 Asic[ 6]:637 Asic[ 7]:637 Asic[ 8]:637
Asic[ 9]:637 Asic[10]:637 Asic[11]:637 Asic[12]:637 Asic[13]:637 Asic[14]:637 Asic[15]:637 Asic[16]:637
Asic[17]:637 Asic[18]:637 Asic[19]:637 Asic[20]:637 Asic[21]:637 Asic[22]:637 Asic[23]:637 Asic[24]:637
Asic[25]:637 Asic[26]:637 Asic[27]:637 Asic[28]:637 Asic[29]:637 Asic[30]:637 Asic[31]:637 Asic[32]:637
Asic[33]:637 Asic[34]:637 Asic[35]:637 Asic[36]:637 Asic[37]:637 Asic[38]:637 Asic[39]:637 Asic[40]:637
Asic[41]:637 Asic[42]:637 Asic[43]:637 Asic[44]:637 Asic[45]:637 Asic[46]:637 Asic[47]:637 Asic[48]:637
Asic[49]:643 Asic[50]:643 Asic[51]:643 Asic[52]:643 Asic[53]:643 Asic[54]:643 Asic[55]:643 Asic[56]:643
Asic[57]:643 Asic[58]:643 Asic[59]:643 Asic[60]:643 Asic[61]:643 Asic[62]:643
Chain:7 max freq=643
Chain:7 min freq=637
max freq = 656
set baud=1
Chain[J6] PIC temp offset=62,0,0,0,0,0,35,28
chain[5] temp chip I2C addr=0x98
chain[5] has no middle temp, use special fix mode.
Chain[J6] chip[244] use PIC middle temp offset=0 typeID=55
New offset Chain[5] chip[244] local:26 remote:27 offset:29
Chain[J6] chip[244] get middle temp offset=29 typeID=55
Chain[J7] PIC temp offset=62,0,0,0,0,0,35,28
chain[6] temp chip I2C addr=0x98
chain[6] has no middle temp, use special fix mode.
Chain[J7] chip[244] use PIC middle temp offset=0 typeID=55
New offset Chain[6] chip[244] local:26 remote:27 offset:29
Chain[J7] chip[244] get middle temp offset=29 typeID=55
Chain[J8] PIC temp offset=62,0,0,0,0,0,35,28
chain[7] temp chip I2C addr=0x98
chain[7] has no middle temp, use special fix mode.
Chain[J8] chip[244] use PIC middle temp offset=0 typeID=55
New offset Chain[7] chip[244] local:26 remote:28 offset:28
Chain[J8] chip[244] get middle temp offset=28 typeID=55
miner rate=13501 voltage limit=900 on chain[5]
get PIC voltage=880 on chain[5], check: must be < 900
miner rate=13501 voltage limit=900 on chain[6]
get PIC voltage=900 on chain[6], check: must be < 900
miner rate=13501 voltage limit=900 on chain[7]
get PIC voltage=880 on chain[7], check: must be < 900
Chain[J6] set working voltage=880 [108]
Chain[J7] set working voltage=900 [74]
Chain[J8] set working voltage=880 [108]
do heat board 8xPatten for 1 times
start send works on chain[5]
start send works on chain[6]
start send works on chain[7]
get send work num :57456 on Chain[5]
get send work num :57456 on Chain[6]
get send work num :57456 on Chain[7]
wait recv nonce on chain[5]
wait recv nonce on chain[6]
wait recv nonce on chain[7]
get nonces on chain[5]
require nonce number:912
require validnonce number:57456
asic[00]=912 asic[01]=912 asic[02]=912 asic[03]=912 asic[04]=912 asic[05]=912 asic[06]=912 asic[07]=912
asic[08]=912 asic[09]=912 asic[10]=912 asic[11]=912 asic[12]=912 asic[13]=912 asic[14]=912 asic[15]=912
asic[16]=912 asic[17]=912 asic[18]=912 asic[19]=912 asic[20]=912 asic[21]=912 asic[22]=912 asic[23]=912
asic[24]=912 asic[25]=912 asic[26]=912 asic[27]=912 asic[28]=912 asic[29]=912 asic[30]=912 asic[31]=912
asic[32]=912 asic[33]=912 asic[34]=912 asic[35]=912 asic[36]=912 asic[37]=912 asic[38]=912 asic[39]=912
asic[40]=912 asic[41]=912 asic[42]=912 asic[43]=912 asic[44]=912 asic[45]=912 asic[46]=912 asic[47]=912
asic[48]=912 asic[49]=912 asic[50]=912 asic[51]=912 asic[52]=912 asic[53]=912 asic[54]=912 asic[55]=912
asic[56]=912 asic[57]=912 asic[58]=912 asic[59]=912 asic[60]=912 asic[61]=912 asic[62]=912
Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!
freq[00]=618 freq[01]=631 freq[02]=650 freq[03]=618 freq[04]=631 freq[05]=656 freq[06]=618 freq[07]=631
freq[08]=656 freq[09]=618 freq[10]=631 freq[11]=656 freq[12]=631 freq[13]=637 freq[14]=606 freq[15]=487
freq[16]=637 freq[17]=656 freq[18]=618 freq[19]=637 freq[20]=656 freq[21]=631 freq[22]=650 freq[23]=656
freq[24]=631 freq[25]=537 freq[26]=656 freq[27]=631 freq[28]=587 freq[29]=656 freq[30]=612 freq[31]=650
freq[32]=656 freq[33]=631 freq[34]=650 freq[35]=656 freq[36]=631 freq[37]=656 freq[38]=656 freq[39]=631
freq[40]=656 freq[41]=656 freq[42]=543 freq[43]=656 freq[44]=656 freq[45]=568 freq[46]=656 freq[47]=656
freq[48]=631 freq[49]=568 freq[50]=656 freq[51]=631 freq[52]=625 freq[53]=656 freq[54]=631 freq[55]=656
freq[56]=656 freq[57]=631 freq[58]=656 freq[59]=656 freq[60]=631 freq[61]=656 freq[62]=656
total valid nonce number:57456
total send work number:57456
require valid nonce number:57456
repeated_nonce_num:0
err_nonce_num:25912
last_nonce_num:14370
get nonces on chain[6]
require nonce number:912
require validnonce number:57456
asic[00]=912 asic[01]=912 asic[02]=912 asic[03]=912 asic[04]=912 asic[05]=912 asic[06]=912 asic[07]=912
asic[08]=912 asic[09]=912 asic[10]=912 asic[11]=912 asic[12]=912 asic[13]=912 asic[14]=912 asic[15]=912
asic[16]=912 asic[17]=912 asic[18]=912 asic[19]=912 asic[20]=912 asic[21]=912 asic[22]=912 asic[23]=912
asic[24]=912 asic[25]=912 asic[26]=912 asic[27]=912 asic[28]=912 asic[29]=912 asic[30]=912 asic[31]=912
asic[32]=912 asic[33]=912 asic[34]=912 asic[35]=912 asic[36]=912 asic[37]=912 asic[38]=912 asic[39]=912
asic[40]=912 asic[41]=912 asic[42]=912 asic[43]=912 asic[44]=912 asic[45]=912 asic[46]=912 asic[47]=912
asic[48]=912 asic[49]=912 asic[50]=912 asic[51]=912 asic[52]=912 asic[53]=912 asic[54]=912 asic[55]=912
asic[56]=912 asic[57]=912 asic[58]=912 asic[59]=912 asic[60]=912 asic[61]=912 asic[62]=912
Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!
freq[00]=631 freq[01]=631 freq[02]=631 freq[03]=631 freq[04]=631 freq[05]=631 freq[06]=631 freq[07]=631
freq[08]=631 freq[09]=631 freq[10]=631 freq[11]=631 freq[12]=631 freq[13]=631 freq[14]=631 freq[15]=631
freq[16]=631 freq[17]=631 freq[18]=631 freq[19]=631 freq[20]=631 freq[21]=631 freq[22]=631 freq[23]=631
freq[24]=631 freq[25]=631 freq[26]=631 freq[27]=631 freq[28]=631 freq[29]=631 freq[30]=631 freq[31]=631
freq[32]=631 freq[33]=631 freq[34]=631 freq[35]=637 freq[36]=637 freq[37]=637 freq[38]=637 freq[39]=637
freq[40]=637 freq[41]=637 freq[42]=637 freq[43]=637 freq[44]=637 freq[45]=637 freq[46]=637 freq[47]=637
freq[48]=637 freq[49]=637 freq[50]=637 freq[51]=637 freq[52]=637 freq[53]=637 freq[54]=637 freq[55]=637
freq[56]=637 freq[57]=637 freq[58]=637 freq[59]=637 freq[60]=637 freq[61]=637 freq[62]=637
total valid nonce number:57456
total send work number:57456
require valid nonce number:57456
repeated_nonce_num:0
err_nonce_num:25987
last_nonce_num:14368
get nonces on chain[7]
require nonce number:912
require validnonce number:57456
asic[00]=912 asic[01]=912 asic[02]=912 asic[03]=912 asic[04]=912 asic[05]=912 asic[06]=912 asic[07]=912
asic[08]=907 asic[09]=912 asic[10]=912 asic[11]=912 asic[12]=912 asic[13]=912 asic[14]=912 asic[15]=912
asic[16]=912 asic[17]=912 asic[18]=912 asic[19]=909 asic[20]=912 asic[21]=912 asic[22]=912 asic[23]=912
asic[24]=912 asic[25]=912 asic[26]=912 asic[27]=912 asic[28]=912 asic[29]=912 asic[30]=912 asic[31]=912
asic[32]=912 asic[33]=912 asic[34]=912 asic[35]=912 asic[36]=912 asic[37]=912 asic[38]=912 asic[39]=912
asic[40]=912 asic[41]=912 asic[42]=912 asic[43]=912 asic[44]=912 asic[45]=912 asic[46]=912 asic[47]=912
asic[48]=912 asic[49]=912 asic[50]=912 asic[51]=912 asic[52]=912 asic[53]=912 asic[54]=912 asic[55]=911
asic[56]=912 asic[57]=912 asic[58]=912 asic[59]=912 asic[60]=912 asic[61]=912 asic[62]=912
Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!
asic[08]=907
core[049]=7 core[053]=5 core[056]=7
asic[19]=909
core[064]=7 core[112]=6
asic[55]=911
core[007]=7
freq[00]=637 freq[01]=637 freq[02]=637 freq[03]=637 freq[04]=637 freq[05]=637 freq[06]=637 freq[07]=637
freq[08]=637 freq[09]=637 freq[10]=637 freq[11]=637 freq[12]=637 freq[13]=637 freq[14]=637 freq[15]=637
freq[16]=637 freq[17]=637 freq[18]=637 freq[19]=637 freq[20]=637 freq[21]=637 freq[22]=637 freq[23]=637
freq[24]=637 freq[25]=637 freq[26]=637 freq[27]=637 freq[28]=637 freq[29]=637 freq[30]=637 freq[31]=637
freq[32]=637 freq[33]=637 freq[34]=637 freq[35]=637 freq[36]=637 freq[37]=637 freq[38]=637 freq[39]=637
freq[40]=637 freq[41]=637 freq[42]=637 freq[43]=637 freq[44]=637 freq[45]=637 freq[46]=637 freq[47]=637
freq[48]=637 freq[49]=643 freq[50]=643 freq[51]=643 freq[52]=643 freq[53]=643 freq[54]=643 freq[55]=643
freq[56]=643 freq[57]=643 freq[58]=643 freq[59]=643 freq[60]=643 freq[61]=643 freq[62]=643
total valid nonce number:57447
total send work number:57456
require valid nonce number:57456
repeated_nonce_num:0
err_nonce_num:26183
last_nonce_num:35748
chain[5]: All chip cores are opened OK!
Test Patten on chain[5]: OK!
chain[6]: All chip cores are opened OK!
Test Patten on chain[6]: OK!
chain[7]: All chip cores are opened OK!
Test Patten on chain[7]: OK!
setStartTimePoint total_tv_start_sys=217 total_tv_end_sys=218
restartNum = 2 , auto-reinit enabled...
do read_temp_func once...
do check_asic_reg 0x08
get RT hashrate from Chain[5]: (asic index start from 1-63)
Asic[01]=72.5110 Asic[02]=68.6020 Asic[03]=74.4230 Asic[04]=74.6750 Asic[05]=71.4540 Asic[06]=77.5610 Asic[07]=74.7760 Asic[08]=74.3900
Asic[09]=77.7790 Asic[10]=76.7220 Asic[11]=73.8020 Asic[12]=68.5850 Asic[13]=76.1680 Asic[14]=72.4770 Asic[15]=73.0470 Asic[16]=57.8810
Asic[17]=74.4740 Asic[18]=76.4530 Asic[19]=67.8800 Asic[20]=70.1280 Asic[21]=73.7520 Asic[22]=74.6580 Asic[23]=73.6850 Asic[24]=78.5170
Asic[25]=73.6850 Asic[26]=63.6860 Asic[27]=80.9660 Asic[28]=73.9200 Asic[29]=68.9870 Asic[30]=75.6310 Asic[31]=74.9770 Asic[32]=69.4570
Asic[33]=74.6580 Asic[34]=79.8930 Asic[35]=76.6710 Asic[36]=74.3730 Asic[37]=66.6050 Asic[38]=76.7380 Asic[39]=71.4540 Asic[40]=69.3060
Asic[41]=72.5610 Asic[42]=73.8530 Asic[43]=58.9210 Asic[44]=75.3800 Asic[45]=73.1310 Asic[46]=68.4000 Asic[47]=77.6780 Asic[48]=73.1150
Asic[49]=69.2890 Asic[50]=62.8130 Asic[51]=74.2720 Asic[52]=73.1480 Asic[53]=67.4440 Asic[54]=72.4940 Asic[55]=68.1990 Asic[56]=72.4100
Asic[57]=75.3460 Asic[58]=66.1350 Asic[59]=72.9800 Asic[60]=78.1480 Asic[61]=72.3260 Asic[62]=72.5610 Asic[63]=77.7950
get RT hashrate from Chain[6]: (asic index start from 1-63)
Asic[01]=67.6620 Asic[02]=75.9840 Asic[03]=70.3300 Asic[04]=75.5640 Asic[05]=62.8470 Asic[06]=70.2790 Asic[07]=74.5240 Asic[08]=72.9130
Asic[09]=70.6320 Asic[10]=72.5610 Asic[11]=73.9370 Asic[12]=77.3420 Asic[13]=72.4440 Asic[14]=68.8030 Asic[15]=73.0810 Asic[16]=73.8360
Asic[17]=73.5510 Asic[18]=73.9700 Asic[19]=71.0340 Asic[20]=71.1680 Asic[21]=72.1580 Asic[22]=78.8190 Asic[23]=71.9230 Asic[24]=69.4570
Asic[25]=67.7630 Asic[26]=71.7220 Asic[27]=76.4030 Asic[28]=71.1180 Asic[29]=68.7360 Asic[30]=69.7090 Asic[31]=77.5610 Asic[32]=70.1790
Asic[33]=67.9140 Asic[34]=72.3930 Asic[35]=64.5920 Asic[36]=72.1920 Asic[37]=74.6080 Asic[38]=75.4470 Asic[39]=73.8700 Asic[40]=73.9370
Asic[41]=66.2860 Asic[42]=79.4230 Asic[43]=75.8160 Asic[44]=68.6350 Asic[45]=74.7920 Asic[46]=70.7990 Asic[47]=71.2360 Asic[48]=73.8700
Asic[49]=66.5380 Asic[50]=70.6150 Asic[51]=72.6280 Asic[52]=75.7490 Asic[53]=71.8400 Asic[54]=76.5370 Asic[55]=73.5340 Asic[56]=69.2390
Asic[57]=75.1280 Asic[58]=74.3230 Asic[59]=73.4330 Asic[60]=72.3430 Asic[61]=77.6780 Asic[62]=82.4600 Asic[63]=69.5240
get RT hashrate from Chain[7]: (asic index start from 1-63)
Asic[01]=73.5510 Asic[02]=75.9160 Asic[03]=80.1110 Asic[04]=76.9900 Asic[05]=76.1510 Asic[06]=73.5170 Asic[07]=74.9940 Asic[08]=73.1150
Asic[09]=70.6650 Asic[10]=70.6990 Asic[11]=72.4770 Asic[12]=70.1450 Asic[13]=74.3060 Asic[14]=71.8060 Asic[15]=74.7420 Asic[16]=75.6650
Asic[17]=76.8220 Asic[18]=69.5240 Asic[19]=72.0910 Asic[20]=75.2620 Asic[21]=72.0240 Asic[22]=73.2660 Asic[23]=76.2690 Asic[24]=69.9440
Asic[25]=67.7290 Asic[26]=71.7050 Asic[27]=74.6250 Asic[28]=78.2320 Asic[29]=69.8430 Asic[30]=68.4670 Asic[31]=71.5210 Asic[32]=68.9540
Asic[33]=74.6250 Asic[34]=71.8730 Asic[35]=74.4400 Asic[36]=74.8760 Asic[37]=73.9030 Asic[38]=72.9300 Asic[39]=69.6250 Asic[40]=74.9430
Asic[41]=72.7620 Asic[42]=69.4910 Asic[43]=67.4270 Asic[44]=71.4870 Asic[45]=74.4570 Asic[46]=66.6550 Asic[47]=67.5450 Asic[48]=75.4800
Asic[49]=72.2590 Asic[50]=72.9300 Asic[51]=75.6820 Asic[52]=71.9070 Asic[53]=67.9640 Asic[54]=67.8470 Asic[55]=74.3900 Asic[56]=71.0010
Asic[57]=75.8490 Asic[58]=74.9270 Asic[59]=72.3930 Asic[60]=74.3730 Asic[61]=75.5310 Asic[62]=73.8190 Asic[63]=72.4440
Check Chain[J6] ASIC RT error: (asic index start from 1-63)
Check Chain[J7] ASIC RT error: (asic index start from 1-63)
Check Chain[J8] ASIC RT error: (asic index start from 1-63)
Done check_asic_reg
do read temp on Chain[5]
Chain[5] Chip[62] TempTypeID=55 middle offset=29
Chain[5] Chip[62] local Temp=60
Chain[5] Chip[62] middle Temp=70
Special fix Chain[5] Chip[62] middle Temp = 75
Done read temp on Chain[5]
do read temp on Chain[6]
Chain[6] Chip[62] TempTypeID=55 middle offset=29
Chain[6] Chip[62] local Temp=60
Chain[6] Chip[62] middle Temp=72
Special fix Chain[6] Chip[62] middle Temp = 75
Done read temp on Chain[6]
do read temp on Chain[7]
Chain[7] Chip[62] TempTypeID=55 middle offset=28
Chain[7] Chip[62] local Temp=62
Chain[7] Chip[62] middle Temp=72
Special fix Chain[7] Chip[62] middle Temp = 77
Done read temp on Chain[7]
set FAN speed according to: temp_highest=62 temp_top1[PWM_T]=62 temp_top1[TEMP_POS_LOCAL]=62 temp_change=0 fix_fan_steps=0
FAN PWM: 74
read_temp_func Done!
CRC error counter=0
submitted by Timsierramist to BitcoinMining [link] [comments]

Lore v2 QT on Raspberry Pi

Hello,
 
To follow up to mindphuk's excellent piece on building the headless client on Raspberry Pi (https://www.reddit.com/blackcoin/comments/6gkjrw/wip_blackpi_a_stake_device_based_on_raspberry/), I thought if anyone was interested I'd show you how to get the full QT version running on the Pi on the Jessie with Pixel desktop. This works and has been soak tested for several days now on a standard Raspberry Pi 3. I have since added some coins and it stakes a handful of times a day.
 
Running staking Lore clients paves the way for some of the future use cases of BLK utilising the Bitcoin 0.12 (and newer) core tech, including colored coins. So I'm going to leave this one going indefinitely to kickstart the number of Lore clients staking. It's certainly not mandatory but it will be good in the longer term to have a nice distribution of Lore staking clients.
 
The cross-compile which lets you create binaries for multiple platforms didn't work for the QT version on the Pi, so there is more to do than just running the binary unfortunately, as below. There are folks working on some much cleaner solutions than this for the Pi, with a custom front end, and where you won't have to do any mucking about. That is coming soon. In the meantime, if you enjoy a fiddle with such things, here's how to get this QT client working on your Pi.
 
These instructions assume you are starting from scratch with a completely blank OS.
 
Download Jessie with Pixel from: http://downloads.raspberrypi.org/raspbian/images/raspbian-2017-07-05/2017-07-05-raspbian-jessie.zip
 
Note they have since (August 2017) released a version called 'Stretch' which does not work with this guide. I'll see if I can come up with something new for that at some point and link to it here when I have. In the meantime the guide should work with the Jessie image above.
 
Unzip the file and extract the .img file to burn it onto Fresh SD card to boot from (to be safe, use 16GB or larger), using a tool like win32diskimager or Etcher.
 
Assuming you have keyboard/mouse and monitor plugged into your pi, boot it up and the Jessie Desktop will show.
 
Before we do anything else, you should increase the default swap size on the pi, as compiling certain libraries can exhaust the RAM and get stuck otherwise. To do this, launch a Terminal window and type:
 
sudo nano /etc/dphys-swapfile 
 
and Change the CONF_SWAPSIZE from 100 to:
 
CONF_SWAPSIZE=1024 
 
Exit nano with control + x to write out the file.
 
Then, run the following to restart the swapfile manager:
 
sudo /etc/init.d/dphys-swapfile stop sudo /etc/init.d/dphys-swapfile start 
 
Now, launch the browser and download the Lore 2.12 binaries for ARM here: https://mega.nz/#!k2InxZhb!iaLhUPreA7LZqZ-Az-0StRBUshSJ82XjldPsvhGBBH4 (Version with fee fix from 6 September 2017)
 
(If you prefer to compile it yourself instead, it is possible by following the instructions in the original article by Mindphuk just taking into account this is the newer version of the Lore client than when that was written (https://github.com/janko33bd/bitcoin/releases) and the versions of Boost and the Berkeley DB need to be the same as below.)
 
Double click the zip and extract the Lore binary files. Yes, at the moment they are all called 'bitcoin', not 'blackcoin' or 'Lore' - this is because the code derives from a recent bitcoin core implementation so this has not yet been updated. You can place these wherever you like.
 
In the Terminal window, change directory to where you put the binaries, e.g.:
 
cd Downloads/lore-raspberrypi-armv7-jessie-pixel chmod +x * 
 
That marks the binaries as executable.
 
Now, we need the Boost libraries installed for any of the Lore binaries to work. The project was done with Boost 1.62.0. Unfortunately the Jessie repository only goes up to 1.55, so we need to download and build 1.62 manually on the device.
wget https://sourceforge.net/projects/boost/files/boost/1.62.0/boost_1_62_0.tar.gz/download tar -xvzf download cd boost_1_62_0 sudo ./bootstrap.sh sudo ./b2 install 
 
(This will take almost 2 hours. Have a nice cup of tea and a sit down.)
 
When I came to run the binaries, I found they couldn't find Boost. Running this command fixes that:
sudo ldconfig 
 
Now we are going to install the packages which aren't already included in the default OS installation which the binaries need in order to run:
sudo apt-get install qrencode libprotobuf-dev libevent-pthreads-2.0-5 
 
Now we need to install the Berkeley Database version 6.2.23. This is the version Lore v2 uses. Bitcoin still uses 4.8 which is 10 years old! This doesn't take too long.
wget http://download.oracle.com/berkeley-db/db-6.2.23.tar.gz tar -xvzf db-6.2.23.tar.gz cd db-6.2.23/build_unix ../dist/configure --prefix=/usr --enable-compat185 --enable-dbm --disable-static --enable-cxx 
 
I find this next section of the Berkeley instructions worked better just switching to root, which can be fudged by running sudo su before the rest:
sudo su make make docdir=/usshare/doc/db-6.2.23 install chown -v -R root:root /usbin/db_* /usinclude/db{,_185,_cxx}.h /uslib/libdb*.{so,la} /usshare/doc/db-6.2.23 
 
Now we're going to go up a couple of directories to where the binaries were:
cd ../.. 
 
Then run the client!
./bitcoin-qt 
 
And there you have it. Should hopefully end up looking a bit like this: http://imgur.com/a/eEHGa
 
Using the Bootstrap can save a while syncing. Download it at: https://www.reddit.com/blackcoin/comments/6b3imq/blackcoin_bootstrapdat_up_to_block_1631800
 
Place the bootstrap.dat file into the ~/.lore directory.
 
Run ./bitcoin-qt again, it will say 'Importing Blocks' rather than 'Synchronising with Network'. My pi sync'ed fully in about 5-6 hours.
 
If you want peace of mind that Lore will always start on bootup into the Jessie w/Pixel desktop (i.e. after a power cycle), then you need to create a .desktop file in the following place.
sudo nano ~/.config/autostart/Lore.desktop 
 
And in it, enter the following (tailoring the Exec line below to the whereabouts of your bitcoin-qt file):
[Desktop Entry] Name=Blackcoin Lore Comment=Mining without the waste Exec=/home/pi/Downloads/lore-raspberrypi-armv7-jessie-pixel/bitcoin-qt Type=Application Encoding=UTF-8 Terminal=false Categories=None; 
 
Power usage and payback time
 
After a good while leaving it going by itself, the CPU load averages got down to almost zero, all of the time. Idling, the Pi uses a bit less than 3 watts. This means it would take two weeks to use one 1Kw/h of electricity.
 
If you pay e.g. 12.5 cents a unit, that's what you'd expect this to cost to run in a fortnight. That's around $0.25 a month or $3 a year. Green and cheap and helping to secure the BLK network. I paid for the year's worth of electricity in 2 days staking with 25k BLK. Makes mining look silly, huh? ;)
 
Securing your Pi
 
With staking, your wallet needs to be unlocked and as such, the keys to your wallet are on the device. In a clean and newly installed environment as described above, and if you don't allow others to use your device and there is no other software or nasties running on it, there is no real cause for concern. However, there are some basic security precautions you can take.
 
Firstly, if you have enabled SSH and are playing with your pi across your LAN (or worse, the Internet), you should immediately change the password for the default 'pi' user (which is preconfigured to be 'raspberry'). Simply log in as normal, then type:
 
passwd 
 
You'll be prompted to enter the old and the new passwords.
 
Security by default
 
Your Pi is likely, by default, to not be exposed to incoming connections from the outside world because your router is likely generating a private address range for your LAN (192.168.x.x or 10.0.x.x or 172.x.x.x) which means all incoming connections are effectively blocked at the router anyway unless you set up a 'port forward' record to allow packets arriving on certain ports to be forwarded to a specific internal IP address.
 
As for accessing your Pi across the internet, if you have set up a port forward, this likely has security ramifications. Even basic old fashioned protocols have proven in recent times to have uncaught flaws, so it's always advisable to lock down your device as much as possible, and even if you only plan to access the Pi over your LAN, install a firewall to configure this. I used one called ufw, because it's literally an uncomplicated firewall.
 
sudo apt-get install ufw sudo ufw allow from 192.168.0.0/16 to any port 22 sudo ufw --force enable 
 
This allows just port 22 (SSH) to be open on the Pi to any device on my LAN's subnet (192.168.0.x). You can change the above to a single IP address if paranoid, or add several lines, if you want to lock it down to your LAN and a specific external static IP address (e.g. a VPN service you use). To find out what subnet your router uses, just type:
 
ifconfig 
 
and you'll see on the interface you are using (either hard wired or wifi) the 192.168 or 10. or 172. prefix. Change the above rule so it matches the first two octets correctly (e.g. 10.0.0.0/16 if you're on a 10.0. address).
 
You may already use VNC to access your Pi's desktop across your LAN, this uses port 5900. Add a line like above to lock it down to an internal address. It's not a good idea to expose this port to the wider world because those connections are not encrypted and potentially could be subjected to a MITM attack.
 
You can query the status of the firewall like this:
ufw status 
 
And of course, try connecting remotely once you change the rules to see what works. You should consult the official documentation for further options: https://help.ubuntu.com/community/UFW
 
Back up & Recovery
 
There are again many ways to tackle this so I'll just speak about my basic precautions in this regard. Don't take it as a be-all-and-end-all!
 
The wallet.dat file is the key file (literally) containing all the private/public keys and transactions. This can be found in:
 
~/.lore 
 
You can navigate there using Jessie w/Pixel's own file manager or in a terminal window (cd ~/.lore). You can copy this file or, if you'd rather keep a plain text file of all your public and private keys, use the 'dumpwallet' command in the console. In Lore, go to Help > Debug Window > Console and type 'dumpwallet myfilename' where myfilename is the file you want it to spit out with all your keys in it. This file will end up in the same place you launch bitcoin-qt from.
 
The instructions earlier on, when running Lore for the first time intentionally left out encrypting your wallet.dat file because in order for the wallet to stake upon startup, it needs to have a decrypted key already. This isn't perfect, but after a power cycle, it would never stake unless you left it decrypted. So the best practice here is as soon as the wallet.dat file has left your device, i.e. you copy it to a USB stick for example, put it in an encrypted folder or drive (or both).
 
In Windows, one way is to use Bitlocker drive encryption for the entire drive. You should follow the instructions here to encrypt your flash drive before your wallet.dat is on there, and don't forget the password!!
http://infosec.nmsu.edu/instructions-guides/how-to-enable-bitlocker-to-go-for-external-hard-drives-and-usb-flash-drives/
 
On the Mac, I use a software package called Concealer to encrypt files I store on the Mac itself: http://www.belightsoft.com/products/conceale   There are almost certainly free packages with similar functionality, I have just used that one for years.
 
Either way, if you want to just make sure your USB drive is encrypted, you can do so in one-click in Finder before you put the sensitive files on it: http://lifehacker.com/encrypt-a-usb-stick-in-finder-with-a-click-1594798016
 
Note that these disk encryption methods may mean having to access the USB stick on a PC or Mac in order to retrieve the files in the event of a disaster. Be aware this may mean exposing them to more security issues if your computer is in any way compromised or someone nefarious has access to your computer. There are more 'manual' ways of backing up and recovering, such as literally writing down private/public key pairs which this guide doesn't go into, but may suit you better if paranoid about your setup.
 
Recovery
 
The wallet.dat file has everything in it you need to recover your wallet, or if you used 'dumpwallet', the file you saved out has all the keys.
 
Wallet.dat method: Install Lore as normal then replace any auto-generated wallet.dat in ~/.lore directory with your backup. If a lot of time has elapsed and many transactions have occurred since your backup, launch lore with:
./bitcoin-qt -rescan 
 
And if that doesn't do the job, do a full reindex of the blockchain:
 
./bitcoin-qt -reindex 
 
If you used the dumpwallet command, install Lore then place the file containing all the keys that you saved out in the same directory as bitcoin-qt. In Lore, go to Help > Debug Window > Console and type 'importwallet myfilename' where myfilename is that file containing all the keys. The wallet should automatically rescan for transactions at that point and you should be good to go.
 
There are a million ways to do effective security and disaster recovery, but I hope this shows you a couple of basic precautionary ways. There are discussions about better ways to stake without compromising too much security which are happening all the time and developments in this regard will happen in time.
 
In the meantime, feel free to comment with your best practices.
 
submitted by patcrypt to blackcoin [link] [comments]

Antminer S9 not hashing?

Good morning folks,
I have an Antminer S9 that has performed flawlessly. After I moved it to a better location, I noticed that it no longer seems to be working. The green light is flashing, but it doesn't seem to be hashing to my pool (Nicehash).
I'm fairly new to Bitcoining mining and can't make sense of some of the information on my status screen. Before I jump into Bitmain support, I was wondering if anyone could clue me in as to what the problem might be.
https://s15.postimg.cc/i0n5qsyoInked_Capture_LI.jpg
I'll post my Kernal Log here.
Thank you in advance!!!
KERNAL LOG: [ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 3.14.0-xilinx-ge8a2f71-dirty ([email protected]) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #82 SMP PREEMPT Tue May 16 19:49:53 CST 2017
[ 0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine model: Xilinx Zynq
[ 0.000000] cma: CMA: reserved 128 MiB at 27800000
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] On node 0 totalpages: 258048
[ 0.000000] free_area_init_node: node 0, pgdat c0740a40, node_mem_map e6fd8000
[ 0.000000] Normal zone: 1520 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 194560 pages, LIFO batch:31
[ 0.000000] HighMem zone: 496 pages used for memmap
[ 0.000000] HighMem zone: 63488 pages, LIFO batch:15
[ 0.000000] PERCPU: Embedded 8 pages/cpu @e6fc0000 s9088 r8192 d15488 u32768
[ 0.000000] pcpu-alloc: s9088 r8192 d15488 u32768 alloc=8*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 256528
[ 0.000000] Kernel command line: noinitrd mem=1008M console=ttyPS0,115200 root=ubi0:rootfs ubi.mtd=1 rootfstype=ubifs rw rootwait
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Memory: 884148K/1032192K available (5032K kernel code, 283K rwdata, 1916K rodata, 204K init, 258K bss, 148044K reserved, 253952K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc06d1374 (6949 kB)
[ 0.000000] .init : 0xc06d2000 - 0xc0705380 ( 205 kB)
[ 0.000000] .data : 0xc0706000 - 0xc074cf78 ( 284 kB)
[ 0.000000] .bss : 0xc074cf84 - 0xc078d9fc ( 259 kB)
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] ps7-slcr mapped to f0004000
[ 0.000000] zynq_clock_init: clkc starts at f0004100
[ 0.000000] Zynq clock init
[ 0.000015] sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 3298534883328ns
[ 0.000308] ps7-ttc #0 at f0006000, irq=43
[ 0.000618] Console: colour dummy device 80x30
[ 0.000658] Calibrating delay loop... 1325.46 BogoMIPS (lpj=6627328)
[ 0.040207] pid_max: default: 32768 minimum: 301
[ 0.040436] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.040459] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.042612] CPU: Testing write buffer coherency: ok
[ 0.042974] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.043036] Setting up static identity map for 0x4c4b00 - 0x4c4b58
[ 0.043263] L310 cache controller enabled
[ 0.043282] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x72760000, Cache size: 512 kB
[ 0.121037] CPU1: Booted secondary processor
[ 0.210227] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.210357] Brought up 2 CPUs
[ 0.210376] SMP: Total of 2 processors activated.
[ 0.210385] CPU: All CPU(s) started in SVC mode.
[ 0.211051] devtmpfs: initialized
[ 0.213481] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[ 0.214724] regulator-dummy: no parameters
[ 0.223736] NET: Registered protocol family 16
[ 0.226067] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.228361] cpuidle: using governor ladder
[ 0.228374] cpuidle: using governor menu
[ 0.235908] syscon f8000000.ps7-slcr: regmap [mem 0xf8000000-0xf8000fff] registered
[ 0.237440] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[ 0.237453] hw-breakpoint: maximum watchpoint size is 4 bytes.
[ 0.237572] zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xf0080000
[ 0.259435] bio: create slab at 0
[ 0.261172] vgaarb: loaded
[ 0.261915] SCSI subsystem initialized
[ 0.262814] usbcore: registered new interface driver usbfs
[ 0.262985] usbcore: registered new interface driver hub
[ 0.263217] usbcore: registered new device driver usb
[ 0.263743] media: Linux media interface: v0.10
[ 0.263902] Linux video capture interface: v2.00
[ 0.264150] pps_core: LinuxPPS API ver. 1 registered
[ 0.264162] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[[email protected]](mailto:[email protected])>
[ 0.264286] PTP clock support registered
[ 0.264656] EDAC MC: Ver: 3.0.0
[ 0.265719] Advanced Linux Sound Architecture Driver Initialized.
[ 0.268708] DMA-API: preallocated 4096 debug entries
[ 0.268724] DMA-API: debugging enabled by kernel config
[ 0.268820] Switched to clocksource arm_global_timer
[ 0.289596] NET: Registered protocol family 2
[ 0.290280] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.290375] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.290535] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.290612] TCP: reno registered
[ 0.290633] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.290689] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.290971] NET: Registered protocol family 1
[ 0.291346] RPC: Registered named UNIX socket transport module.
[ 0.291359] RPC: Registered udp transport module.
[ 0.291368] RPC: Registered tcp transport module.
[ 0.291376] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.291391] PCI: CLS 0 bytes, default 64
[ 0.291857] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[ 0.293945] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.295408] bounce pool size: 64 pages
[ 0.296323] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[ 0.296525] msgmni has been set to 1486
[ 0.297330] io scheduler noop registered
[ 0.297343] io scheduler deadline registered
[ 0.297385] io scheduler cfq registered (default)
[ 0.308358] dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-2364208
[ 0.308380] dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
[ 0.434378] e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 82, base_baud = 3124999) is a xuartps
[ 1.006815] console [ttyPS0] enabled
[ 1.011106] xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to f0068000
[ 1.018731] [drm] Initialized drm 1.1.0 20060810
[ 1.036029] brd: module loaded
[ 1.045494] loop: module loaded
[ 1.055163] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[ 1.060985] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[ 1.068779] libphy: XEMACPS mii bus: probed
[ 1.073341] ------------- phy_id = 0x3625e62
[ 1.078112] xemacps e000b000.ps7-ethernet: pdev->id -1, baseaddr 0xe000b000, irq 54
[ 1.087072] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.093912] ehci-pci: EHCI PCI platform driver
[ 1.101155] zynq-dr e0002000.ps7-usb: Unable to init USB phy, missing?
[ 1.107952] usbcore: registered new interface driver usb-storage
[ 1.114850] mousedev: PS/2 mouse device common for all mice
[ 1.120975] i2c /dev entries driver
[ 1.127946] zynq-edac f8006000.ps7-ddrc: ecc not enabled
[ 1.133474] cpufreq_cpu0: failed to get cpu0 regulator: -19
[ 1.139426] Xilinx Zynq CpuIdle Driver started
[ 1.144261] sdhci: Secure Digital Host Controller Interface driver
[ 1.150384] sdhci: Copyright(c) Pierre Ossman
[ 1.154700] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.161601] mmc0: no vqmmc regulator found
[ 1.165614] mmc0: no vmmc regulator found
[ 1.208845] mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
[ 1.217539] usbcore: registered new interface driver usbhid
[ 1.223054] usbhid: USB HID core driver
[ 1.227806] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
[ 1.234107] nand: Micron MT29F2G08ABAEAWP
[ 1.238074] nand: 256MiB, SLC, page size: 2048, OOB size: 64
[ 1.244027] Bad block table found at page 131008, version 0x01
[ 1.250251] Bad block table found at page 130944, version 0x01
[ 1.256303] 3 ofpart partitions found on MTD device pl353-nand
[ 1.262080] Creating 3 MTD partitions on "pl353-nand":
[ 1.267174] 0x000000000000-0x000002000000 : "BOOT.bin-env-dts-kernel"
[ 1.275230] 0x000002000000-0x00000b000000 : "angstram-rootfs"
[ 1.282582] 0x00000b000000-0x000010000000 : "upgrade-rootfs"
[ 1.291630] TCP: cubic registered
[ 1.294869] NET: Registered protocol family 17
[ 1.299597] Registering SWP/SWPB emulation handler
[ 1.305497] regulator-dummy: disabling
[ 1.309875] UBI: attaching mtd1 to ubi0
[ 1.836565] UBI: scanning is finished
[ 1.848221] UBI: attached mtd1 (name "angstram-rootfs", size 144 MiB) to ubi0
[ 1.855302] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 1.862063] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 1.868728] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 1.875605] UBI: good PEBs: 1152, bad PEBs: 0, corrupted PEBs: 0
[ 1.881586] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
[ 1.888693] UBI: max/mean erase counter: 4/1, WL threshold: 4096, image sequence number: 1134783803
[ 1.897736] UBI: available PEBs: 0, total reserved PEBs: 1152, PEBs reserved for bad PEB handling: 40
[ 1.906953] UBI: background thread "ubi_bgt0d" started, PID 1080
[ 1.906959] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 1.911038] ALSA device list:
[ 1.911042] No soundcards found.
[ 1.927420] UBIFS: background thread "ubifs_bgt0_0" started, PID 1082
[ 1.956473] UBIFS: recovery needed
[ 2.016970] UBIFS: recovery completed
[ 2.020709] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
[ 2.026635] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 2.035771] UBIFS: FS size: 128626688 bytes (122 MiB, 1013 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
[ 2.045653] UBIFS: reserved for root: 0 bytes (0 KiB)
[ 2.050693] UBIFS: media format: w4/r0 (latest is w4/r0), UUID B079DD56-06BB-4E31-8F5E-A6604F480DB2, small LPT model
[ 2.061987] VFS: Mounted root (ubifs filesystem) on device 0:11.
[ 2.069184] devtmpfs: mounted
[ 2.072297] Freeing unused kernel memory: 204K (c06d2000 - c0705000)
[ 2.920928] random: dd urandom read with 0 bits of entropy available
[ 3.318860]
[ 3.318860] bcm54xx_config_init
[ 3.928853]
[ 3.928853] bcm54xx_config_init
[ 7.929682] xemacps e000b000.ps7-ethernet: Set clk to 124999998 Hz
[ 7.935787] xemacps e000b000.ps7-ethernet: link up (1000/FULL)
[ 22.563181] In axi fpga driver!
[ 22.566260] request_mem_region OK!
[ 22.569676] AXI fpga dev virtual address is 0xf01fe000
[ 22.574751] *base_vir_addr = 0x8c510
[ 22.590723] In fpga mem driver!
[ 22.593791] request_mem_region OK!
[ 22.597361] fpga mem virtual address is 0xf3000000
[ 23.408156]
[ 23.408156] bcm54xx_config_init
[ 24.038071]
[ 24.038071] bcm54xx_config_init
[ 28.038487] xemacps e000b000.ps7-ethernet: Set clk to 124999998 Hz
[ 28.044593] xemacps e000b000.ps7-ethernet: link up (1000/FULL)
This is XILINX board. Totalram: 1039794176
Detect 1GB control board of XILINX
DETECT HW version=0008c510
miner ID : 8118b4c610358854
Miner Type = S9
AsicType = 1387
real AsicNum = 63
use critical mode to search freq...
get PLUG ON=0x000000e0
Find hashboard on Chain[5]
Find hashboard on Chain[6]
Find hashboard on Chain[7]
set_reset_allhashboard = 0x0000ffff
Check chain[5] PIC fw version=0x03
Check chain[6] PIC fw version=0x03
Check chain[7] PIC fw version=0x03
chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[5] has freq in PIC and will jump over...
Chain[5] has core num in PIC
Chain[5] ASIC[15] has core num=5
Check chain[5] PIC fw version=0x03
chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[6] has freq in PIC and will jump over...
Chain[6] has core num in PIC
Chain[6] ASIC[17] has core num=8
Check chain[6] PIC fw version=0x03
chain[7]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[7] has freq in PIC and will jump over...
Chain[7] has core num in PIC
Chain[7] ASIC[8] has core num=13
Chain[7] ASIC[9] has core num=11
Chain[7] ASIC[13] has core num=11
Chain[7] ASIC[19] has core num=14
Chain[7] ASIC[30] has core num=6
Chain[7] ASIC[32] has core num=1
Chain[7] ASIC[42] has core num=2
Chain[7] ASIC[55] has core num=1
Chain[7] ASIC[57] has core num=2
Check chain[7] PIC fw version=0x03
get PIC voltage=108 on chain[5], value=880
get PIC voltage=74 on chain[6], value=900
get PIC voltage=108 on chain[7], value=880
set_reset_allhashboard = 0x00000000
chain[5] temp offset record: 62,0,0,0,0,0,35,28
chain[5] temp chip I2C addr=0x98
chain[5] has no middle temp, use special fix mode.
chain[6] temp offset record: 62,0,0,0,0,0,35,28
chain[6] temp chip I2C addr=0x98
chain[6] has no middle temp, use special fix mode.
chain[7] temp offset record: 62,0,0,0,0,0,35,28
chain[7] temp chip I2C addr=0x98
chain[7] has no middle temp, use special fix mode.
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
CRC error counter=0
set command mode to VIL
--- check asic number
After Get ASIC NUM CRC error counter=0
set_baud=0
The min freq=700
set real timeout 52, need sleep=379392
After TEST CRC error counter=0
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
search freq for 1 times, completed chain = 3, total chain num = 3
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
restart Miner chance num=2
waiting for receive_func to exit!
waiting for pic heart to exit!
bmminer not found= 1643 root 0:00 grep bmminer
bmminer not found, restart bmminer ...
This is user mode for mining
Detect 1GB control board of XILINX
Miner Type = S9
Miner compile time: Fri Nov 17 17:57:49 CST 2017 type: Antminer S9set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
set_reset_allhashboard = 0x0000ffff
miner ID : 8118b4c610358854
set_reset_allhashboard = 0x0000ffff
Checking fans!get fan[2] speed=6120
get fan[2] speed=6120
get fan[2] speed=6120
get fan[2] speed=6120
get fan[2] speed=6120
get fan[2] speed=6120
get fan[5] speed=13440
get fan[2] speed=6120
get fan[5] speed=13440
get fan[2] speed=6120
get fan[5] speed=13440
chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
Chain[J6] has backup chain_voltage=880
Chain[J6] test patten OK temp=-126
Check chain[5] PIC fw version=0x03
chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
Chain[J7] has backup chain_voltage=900
Chain[J7] test patten OK temp=-120
Check chain[6] PIC fw version=0x03
chain[7]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
Chain[J8] has backup chain_voltage=880
Chain[J8] test patten OK temp=-125
Check chain[7] PIC fw version=0x03
Chain[J6] orignal chain_voltage_pic=108 value=880
Chain[J7] orignal chain_voltage_pic=74 value=900
Chain[J8] orignal chain_voltage_pic=108 value=880
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
Chain[J6] has 63 asic
Chain[J7] has 63 asic
Chain[J8] has 63 asic
Chain[J6] has core num in PIC
Chain[J6] ASIC[15] has core num=5
Chain[J7] has core num in PIC
Chain[J7] ASIC[17] has core num=8
Chain[J8] has core num in PIC
Chain[J8] ASIC[8] has core num=13
Chain[J8] ASIC[9] has core num=11
Chain[J8] ASIC[13] has core num=11
Chain[J8] ASIC[19] has core num=14
Chain[J8] ASIC[30] has core num=6
Chain[J8] ASIC[32] has core num=1
Chain[J8] ASIC[42] has core num=2
Chain[J8] ASIC[55] has core num=1
Chain[J8] ASIC[57] has core num=2
miner total rate=13999GH/s fixed rate=13500GH/s
read PIC voltage=940 on chain[5]
Chain:5 chipnum=63
Chain[J6] voltage added=0.2V
Chain:5 temp offset=0
Chain:5 base freq=487
Asic[ 0]:618
Asic[ 1]:631 Asic[ 2]:681 Asic[ 3]:618 Asic[ 4]:631 Asic[ 5]:681 Asic[ 6]:618 Asic[ 7]:631 Asic[ 8]:675
Asic[ 9]:618 Asic[10]:631 Asic[11]:681 Asic[12]:631 Asic[13]:637 Asic[14]:606 Asic[15]:487 Asic[16]:637
Asic[17]:675 Asic[18]:618 Asic[19]:637 Asic[20]:675 Asic[21]:631 Asic[22]:650 Asic[23]:687 Asic[24]:631
Asic[25]:537 Asic[26]:687 Asic[27]:631 Asic[28]:587 Asic[29]:687 Asic[30]:612 Asic[31]:650 Asic[32]:687
Asic[33]:631 Asic[34]:650 Asic[35]:687 Asic[36]:631 Asic[37]:662 Asic[38]:693 Asic[39]:631 Asic[40]:662
Asic[41]:662 Asic[42]:543 Asic[43]:668 Asic[44]:693 Asic[45]:568 Asic[46]:675 Asic[47]:700 Asic[48]:631
Asic[49]:568 Asic[50]:700 Asic[51]:631 Asic[52]:625 Asic[53]:700 Asic[54]:631 Asic[55]:675 Asic[56]:662
Asic[57]:631 Asic[58]:662 Asic[59]:687 Asic[60]:631 Asic[61]:681 Asic[62]:700
Chain:5 max freq=700
Chain:5 min freq=487
read PIC voltage=940 on chain[6]
Chain:6 chipnum=63
Chain[J7] voltage added=0.1V
Chain:6 temp offset=0
Chain:6 base freq=687
Asic[ 0]:650
Asic[ 1]:650 Asic[ 2]:650 Asic[ 3]:650 Asic[ 4]:650 Asic[ 5]:650 Asic[ 6]:650 Asic[ 7]:650 Asic[ 8]:650
Asic[ 9]:650 Asic[10]:650 Asic[11]:650 Asic[12]:650 Asic[13]:650 Asic[14]:650 Asic[15]:650 Asic[16]:650
Asic[17]:650 Asic[18]:650 Asic[19]:650 Asic[20]:650 Asic[21]:650 Asic[22]:650 Asic[23]:650 Asic[24]:650
Asic[25]:650 Asic[26]:656 Asic[27]:656 Asic[28]:656 Asic[29]:656 Asic[30]:656 Asic[31]:656 Asic[32]:656
Asic[33]:656 Asic[34]:656 Asic[35]:656 Asic[36]:656 Asic[37]:656 Asic[38]:656 Asic[39]:656 Asic[40]:656
Asic[41]:656 Asic[42]:656 Asic[43]:656 Asic[44]:656 Asic[45]:656 Asic[46]:656 Asic[47]:656 Asic[48]:656
Asic[49]:656 Asic[50]:656 Asic[51]:656 Asic[52]:656 Asic[53]:656 Asic[54]:656 Asic[55]:656 Asic[56]:656
Asic[57]:656 Asic[58]:656 Asic[59]:656 Asic[60]:656 Asic[61]:656 Asic[62]:656
Chain:6 max freq=656
Chain:6 min freq=650
read PIC voltage=940 on chain[7]
Chain:7 chipnum=63
Chain[J8] voltage added=0.2V
Chain:7 temp offset=0
Chain:7 base freq=637
Asic[ 0]:656
Asic[ 1]:656 Asic[ 2]:656 Asic[ 3]:656 Asic[ 4]:656 Asic[ 5]:656 Asic[ 6]:656 Asic[ 7]:656 Asic[ 8]:637
Asic[ 9]:637 Asic[10]:656 Asic[11]:656 Asic[12]:656 Asic[13]:637 Asic[14]:656 Asic[15]:662 Asic[16]:662
Asic[17]:662 Asic[18]:662 Asic[19]:637 Asic[20]:662 Asic[21]:662 Asic[22]:662 Asic[23]:662 Asic[24]:662
Asic[25]:662 Asic[26]:662 Asic[27]:662 Asic[28]:662 Asic[29]:662 Asic[30]:637 Asic[31]:662 Asic[32]:662
Asic[33]:662 Asic[34]:662 Asic[35]:662 Asic[36]:662 Asic[37]:662 Asic[38]:662 Asic[39]:662 Asic[40]:662
Asic[41]:662 Asic[42]:650 Asic[43]:662 Asic[44]:662 Asic[45]:662 Asic[46]:662 Asic[47]:662 Asic[48]:662
Asic[49]:662 Asic[50]:662 Asic[51]:662 Asic[52]:662 Asic[53]:662 Asic[54]:662 Asic[55]:650 Asic[56]:662
Asic[57]:650 Asic[58]:662 Asic[59]:662 Asic[60]:662 Asic[61]:662 Asic[62]:662
Chain:7 max freq=662
Chain:7 min freq=637
Miner fix freq ...
read PIC voltage=940 on chain[5]
Chain:5 chipnum=63
Chain[J6] voltage added=0.2V
Chain:5 temp offset=0
Chain:5 base freq=487
Asic[ 0]:618
Asic[ 1]:631 Asic[ 2]:650 Asic[ 3]:618 Asic[ 4]:631 Asic[ 5]:656 Asic[ 6]:618 Asic[ 7]:631 Asic[ 8]:656
Asic[ 9]:618 Asic[10]:631 Asic[11]:656 Asic[12]:631 Asic[13]:637 Asic[14]:606 Asic[15]:487 Asic[16]:637
Asic[17]:656 Asic[18]:618 Asic[19]:637 Asic[20]:656 Asic[21]:631 Asic[22]:650 Asic[23]:656 Asic[24]:631
Asic[25]:537 Asic[26]:656 Asic[27]:631 Asic[28]:587 Asic[29]:656 Asic[30]:612 Asic[31]:650 Asic[32]:656
Asic[33]:631 Asic[34]:650 Asic[35]:656 Asic[36]:631 Asic[37]:656 Asic[38]:656 Asic[39]:631 Asic[40]:656
Asic[41]:656 Asic[42]:543 Asic[43]:656 Asic[44]:656 Asic[45]:568 Asic[46]:656 Asic[47]:656 Asic[48]:631
Asic[49]:568 Asic[50]:656 Asic[51]:631 Asic[52]:625 Asic[53]:656 Asic[54]:631 Asic[55]:656 Asic[56]:656
Asic[57]:631 Asic[58]:656 Asic[59]:656 Asic[60]:631 Asic[61]:656 Asic[62]:656
Chain:5 max freq=656
Chain:5 min freq=487
read PIC voltage=940 on chain[6]
Chain:6 chipnum=63
Chain[J7] voltage added=0.1V
Chain:6 temp offset=0
Chain:6 base freq=687
Asic[ 0]:631
Asic[ 1]:631 Asic[ 2]:631 Asic[ 3]:631 Asic[ 4]:631 Asic[ 5]:631 Asic[ 6]:631 Asic[ 7]:631 Asic[ 8]:631
Asic[ 9]:631 Asic[10]:631 Asic[11]:631 Asic[12]:631 Asic[13]:631 Asic[14]:631 Asic[15]:631 Asic[16]:631
Asic[17]:631 Asic[18]:631 Asic[19]:631 Asic[20]:631 Asic[21]:631 Asic[22]:631 Asic[23]:631 Asic[24]:631
Asic[25]:631 Asic[26]:631 Asic[27]:631 Asic[28]:631 Asic[29]:631 Asic[30]:631 Asic[31]:631 Asic[32]:631
Asic[33]:631 Asic[34]:631 Asic[35]:637 Asic[36]:637 Asic[37]:637 Asic[38]:637 Asic[39]:637 Asic[40]:637
Asic[41]:637 Asic[42]:637 Asic[43]:637 Asic[44]:637 Asic[45]:637 Asic[46]:637 Asic[47]:637 Asic[48]:637
Asic[49]:637 Asic[50]:637 Asic[51]:637 Asic[52]:637 Asic[53]:637 Asic[54]:637 Asic[55]:637 Asic[56]:637
Asic[57]:637 Asic[58]:637 Asic[59]:637 Asic[60]:637 Asic[61]:637 Asic[62]:637
Chain:6 max freq=637
Chain:6 min freq=631
read PIC voltage=940 on chain[7]
Chain:7 chipnum=63
Chain[J8] voltage added=0.2V
Chain:7 temp offset=0
Chain:7 base freq=637
Asic[ 0]:637
Asic[ 1]:637 Asic[ 2]:637 Asic[ 3]:637 Asic[ 4]:637 Asic[ 5]:637 Asic[ 6]:637 Asic[ 7]:637 Asic[ 8]:637
Asic[ 9]:637 Asic[10]:637 Asic[11]:637 Asic[12]:637 Asic[13]:637 Asic[14]:637 Asic[15]:637 Asic[16]:637
Asic[17]:637 Asic[18]:637 Asic[19]:637 Asic[20]:637 Asic[21]:637 Asic[22]:637 Asic[23]:637 Asic[24]:637
Asic[25]:637 Asic[26]:637 Asic[27]:637 Asic[28]:637 Asic[29]:637 Asic[30]:637 Asic[31]:637 Asic[32]:637
Asic[33]:637 Asic[34]:637 Asic[35]:637 Asic[36]:637 Asic[37]:637 Asic[38]:637 Asic[39]:637 Asic[40]:637
Asic[41]:637 Asic[42]:637 Asic[43]:637 Asic[44]:637 Asic[45]:637 Asic[46]:637 Asic[47]:637 Asic[48]:637
Asic[49]:643 Asic[50]:643 Asic[51]:643 Asic[52]:643 Asic[53]:643 Asic[54]:643 Asic[55]:643 Asic[56]:643
Asic[57]:643 Asic[58]:643 Asic[59]:643 Asic[60]:643 Asic[61]:643 Asic[62]:643
Chain:7 max freq=643
Chain:7 min freq=637
max freq = 656
set baud=1
Chain[J6] PIC temp offset=62,0,0,0,0,0,35,28
chain[5] temp chip I2C addr=0x98
chain[5] has no middle temp, use special fix mode.
Chain[J6] chip[244] use PIC middle temp offset=0 typeID=55
New offset Chain[5] chip[244] local:26 remote:27 offset:29
Chain[J6] chip[244] get middle temp offset=29 typeID=55
Chain[J7] PIC temp offset=62,0,0,0,0,0,35,28
chain[6] temp chip I2C addr=0x98
chain[6] has no middle temp, use special fix mode.
Chain[J7] chip[244] use PIC middle temp offset=0 typeID=55
New offset Chain[6] chip[244] local:26 remote:27 offset:29
Chain[J7] chip[244] get middle temp offset=29 typeID=55
Chain[J8] PIC temp offset=62,0,0,0,0,0,35,28
chain[7] temp chip I2C addr=0x98
chain[7] has no middle temp, use special fix mode.
Chain[J8] chip[244] use PIC middle temp offset=0 typeID=55
New offset Chain[7] chip[244] local:26 remote:28 offset:28
Chain[J8] chip[244] get middle temp offset=28 typeID=55
miner rate=13501 voltage limit=900 on chain[5]
get PIC voltage=880 on chain[5], check: must be < 900
miner rate=13501 voltage limit=900 on chain[6]
get PIC voltage=900 on chain[6], check: must be < 900
miner rate=13501 voltage limit=900 on chain[7]
get PIC voltage=880 on chain[7], check: must be < 900
Chain[J6] set working voltage=880 [108]
Chain[J7] set working voltage=900 [74]
Chain[J8] set working voltage=880 [108]
do heat board 8xPatten for 1 times
start send works on chain[5]
start send works on chain[6]
start send works on chain[7]
get send work num :57456 on Chain[5]
get send work num :57456 on Chain[6]
get send work num :57456 on Chain[7]
wait recv nonce on chain[5]
wait recv nonce on chain[6]
wait recv nonce on chain[7]
get nonces on chain[5]
require nonce number:912
require validnonce number:57456
asic[00]=912 asic[01]=912 asic[02]=912 asic[03]=912 asic[04]=912 asic[05]=912 asic[06]=912 asic[07]=912
asic[08]=912 asic[09]=912 asic[10]=912 asic[11]=912 asic[12]=912 asic[13]=912 asic[14]=912 asic[15]=912
asic[16]=912 asic[17]=912 asic[18]=912 asic[19]=912 asic[20]=912 asic[21]=912 asic[22]=912 asic[23]=912
asic[24]=912 asic[25]=912 asic[26]=912 asic[27]=912 asic[28]=912 asic[29]=912 asic[30]=912 asic[31]=912
asic[32]=912 asic[33]=912 asic[34]=912 asic[35]=912 asic[36]=912 asic[37]=912 asic[38]=912 asic[39]=912
asic[40]=912 asic[41]=912 asic[42]=912 asic[43]=912 asic[44]=912 asic[45]=912 asic[46]=912 asic[47]=912
asic[48]=912 asic[49]=912 asic[50]=912 asic[51]=912 asic[52]=912 asic[53]=912 asic[54]=912 asic[55]=912
asic[56]=912 asic[57]=912 asic[58]=912 asic[59]=912 asic[60]=912 asic[61]=912 asic[62]=912
Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!
freq[00]=618 freq[01]=631 freq[02]=650 freq[03]=618 freq[04]=631 freq[05]=656 freq[06]=618 freq[07]=631
freq[08]=656 freq[09]=618 freq[10]=631 freq[11]=656 freq[12]=631 freq[13]=637 freq[14]=606 freq[15]=487
freq[16]=637 freq[17]=656 freq[18]=618 freq[19]=637 freq[20]=656 freq[21]=631 freq[22]=650 freq[23]=656
freq[24]=631 freq[25]=537 freq[26]=656 freq[27]=631 freq[28]=587 freq[29]=656 freq[30]=612 freq[31]=650
freq[32]=656 freq[33]=631 freq[34]=650 freq[35]=656 freq[36]=631 freq[37]=656 freq[38]=656 freq[39]=631
freq[40]=656 freq[41]=656 freq[42]=543 freq[43]=656 freq[44]=656 freq[45]=568 freq[46]=656 freq[47]=656
freq[48]=631 freq[49]=568 freq[50]=656 freq[51]=631 freq[52]=625 freq[53]=656 freq[54]=631 freq[55]=656
freq[56]=656 freq[57]=631 freq[58]=656 freq[59]=656 freq[60]=631 freq[61]=656 freq[62]=656
total valid nonce number:57456
total send work number:57456
require valid nonce number:57456
repeated_nonce_num:0
err_nonce_num:25912
last_nonce_num:14370
get nonces on chain[6]
require nonce number:912
require validnonce number:57456
asic[00]=912 asic[01]=912 asic[02]=912 asic[03]=912 asic[04]=912 asic[05]=912 asic[06]=912 asic[07]=912
asic[08]=912 asic[09]=912 asic[10]=912 asic[11]=912 asic[12]=912 asic[13]=912 asic[14]=912 asic[15]=912
asic[16]=912 asic[17]=912 asic[18]=912 asic[19]=912 asic[20]=912 asic[21]=912 asic[22]=912 asic[23]=912
asic[24]=912 asic[25]=912 asic[26]=912 asic[27]=912 asic[28]=912 asic[29]=912 asic[30]=912 asic[31]=912
asic[32]=912 asic[33]=912 asic[34]=912 asic[35]=912 asic[36]=912 asic[37]=912 asic[38]=912 asic[39]=912
asic[40]=912 asic[41]=912 asic[42]=912 asic[43]=912 asic[44]=912 asic[45]=912 asic[46]=912 asic[47]=912
asic[48]=912 asic[49]=912 asic[50]=912 asic[51]=912 asic[52]=912 asic[53]=912 asic[54]=912 asic[55]=912
asic[56]=912 asic[57]=912 asic[58]=912 asic[59]=912 asic[60]=912 asic[61]=912 asic[62]=912
Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!
freq[00]=631 freq[01]=631 freq[02]=631 freq[03]=631 freq[04]=631 freq[05]=631 freq[06]=631 freq[07]=631
freq[08]=631 freq[09]=631 freq[10]=631 freq[11]=631 freq[12]=631 freq[13]=631 freq[14]=631 freq[15]=631
freq[16]=631 freq[17]=631 freq[18]=631 freq[19]=631 freq[20]=631 freq[21]=631 freq[22]=631 freq[23]=631
freq[24]=631 freq[25]=631 freq[26]=631 freq[27]=631 freq[28]=631 freq[29]=631 freq[30]=631 freq[31]=631
freq[32]=631 freq[33]=631 freq[34]=631 freq[35]=637 freq[36]=637 freq[37]=637 freq[38]=637 freq[39]=637
freq[40]=637 freq[41]=637 freq[42]=637 freq[43]=637 freq[44]=637 freq[45]=637 freq[46]=637 freq[47]=637
freq[48]=637 freq[49]=637 freq[50]=637 freq[51]=637 freq[52]=637 freq[53]=637 freq[54]=637 freq[55]=637
freq[56]=637 freq[57]=637 freq[58]=637 freq[59]=637 freq[60]=637 freq[61]=637 freq[62]=637
total valid nonce number:57456
total send work number:57456
require valid nonce number:57456
repeated_nonce_num:0
err_nonce_num:25987
last_nonce_num:14368
get nonces on chain[7]
require nonce number:912
require validnonce number:57456
asic[00]=912 asic[01]=912 asic[02]=912 asic[03]=912 asic[04]=912 asic[05]=912 asic[06]=912 asic[07]=912
asic[08]=907 asic[09]=912 asic[10]=912 asic[11]=912 asic[12]=912 asic[13]=912 asic[14]=912 asic[15]=912
asic[16]=912 asic[17]=912 asic[18]=912 asic[19]=909 asic[20]=912 asic[21]=912 asic[22]=912 asic[23]=912
asic[24]=912 asic[25]=912 asic[26]=912 asic[27]=912 asic[28]=912 asic[29]=912 asic[30]=912 asic[31]=912
asic[32]=912 asic[33]=912 asic[34]=912 asic[35]=912 asic[36]=912 asic[37]=912 asic[38]=912 asic[39]=912
asic[40]=912 asic[41]=912 asic[42]=912 asic[43]=912 asic[44]=912 asic[45]=912 asic[46]=912 asic[47]=912
asic[48]=912 asic[49]=912 asic[50]=912 asic[51]=912 asic[52]=912 asic[53]=912 asic[54]=912 asic[55]=911
asic[56]=912 asic[57]=912 asic[58]=912 asic[59]=912 asic[60]=912 asic[61]=912 asic[62]=912
Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!
asic[08]=907
core[049]=7 core[053]=5 core[056]=7
asic[19]=909
core[064]=7 core[112]=6
asic[55]=911
core[007]=7
freq[00]=637 freq[01]=637 freq[02]=637 freq[03]=637 freq[04]=637 freq[05]=637 freq[06]=637 freq[07]=637
freq[08]=637 freq[09]=637 freq[10]=637 freq[11]=637 freq[12]=637 freq[13]=637 freq[14]=637 freq[15]=637
freq[16]=637 freq[17]=637 freq[18]=637 freq[19]=637 freq[20]=637 freq[21]=637 freq[22]=637 freq[23]=637
freq[24]=637 freq[25]=637 freq[26]=637 freq[27]=637 freq[28]=637 freq[29]=637 freq[30]=637 freq[31]=637
freq[32]=637 freq[33]=637 freq[34]=637 freq[35]=637 freq[36]=637 freq[37]=637 freq[38]=637 freq[39]=637
freq[40]=637 freq[41]=637 freq[42]=637 freq[43]=637 freq[44]=637 freq[45]=637 freq[46]=637 freq[47]=637
freq[48]=637 freq[49]=643 freq[50]=643 freq[51]=643 freq[52]=643 freq[53]=643 freq[54]=643 freq[55]=643
freq[56]=643 freq[57]=643 freq[58]=643 freq[59]=643 freq[60]=643 freq[61]=643 freq[62]=643
total valid nonce number:57447
total send work number:57456
require valid nonce number:57456
repeated_nonce_num:0
err_nonce_num:26183
last_nonce_num:35748
chain[5]: All chip cores are opened OK!
Test Patten on chain[5]: OK!
chain[6]: All chip cores are opened OK!
Test Patten on chain[6]: OK!
chain[7]: All chip cores are opened OK!
Test Patten on chain[7]: OK!
setStartTimePoint total_tv_start_sys=217 total_tv_end_sys=218
restartNum = 2 , auto-reinit enabled...
do read_temp_func once...
do check_asic_reg 0x08
get RT hashrate from Chain[5]: (asic index start from 1-63)
Asic[01]=72.5110 Asic[02]=68.6020 Asic[03]=74.4230 Asic[04]=74.6750 Asic[05]=71.4540 Asic[06]=77.5610 Asic[07]=74.7760 Asic[08]=74.3900
Asic[09]=77.7790 Asic[10]=76.7220 Asic[11]=73.8020 Asic[12]=68.5850 Asic[13]=76.1680 Asic[14]=72.4770 Asic[15]=73.0470 Asic[16]=57.8810
Asic[17]=74.4740 Asic[18]=76.4530 Asic[19]=67.8800 Asic[20]=70.1280 Asic[21]=73.7520 Asic[22]=74.6580 Asic[23]=73.6850 Asic[24]=78.5170
Asic[25]=73.6850 Asic[26]=63.6860 Asic[27]=80.9660 Asic[28]=73.9200 Asic[29]=68.9870 Asic[30]=75.6310 Asic[31]=74.9770 Asic[32]=69.4570
Asic[33]=74.6580 Asic[34]=79.8930 Asic[35]=76.6710 Asic[36]=74.3730 Asic[37]=66.6050 Asic[38]=76.7380 Asic[39]=71.4540 Asic[40]=69.3060
Asic[41]=72.5610 Asic[42]=73.8530 Asic[43]=58.9210 Asic[44]=75.3800 Asic[45]=73.1310 Asic[46]=68.4000 Asic[47]=77.6780 Asic[48]=73.1150
Asic[49]=69.2890 Asic[50]=62.8130 Asic[51]=74.2720 Asic[52]=73.1480 Asic[53]=67.4440 Asic[54]=72.4940 Asic[55]=68.1990 Asic[56]=72.4100
Asic[57]=75.3460 Asic[58]=66.1350 Asic[59]=72.9800 Asic[60]=78.1480 Asic[61]=72.3260 Asic[62]=72.5610 Asic[63]=77.7950
get RT hashrate from Chain[6]: (asic index start from 1-63)
Asic[01]=67.6620 Asic[02]=75.9840 Asic[03]=70.3300 Asic[04]=75.5640 Asic[05]=62.8470 Asic[06]=70.2790 Asic[07]=74.5240 Asic[08]=72.9130
Asic[09]=70.6320 Asic[10]=72.5610 Asic[11]=73.9370 Asic[12]=77.3420 Asic[13]=72.4440 Asic[14]=68.8030 Asic[15]=73.0810 Asic[16]=73.8360
Asic[17]=73.5510 Asic[18]=73.9700 Asic[19]=71.0340 Asic[20]=71.1680 Asic[21]=72.1580 Asic[22]=78.8190 Asic[23]=71.9230 Asic[24]=69.4570
Asic[25]=67.7630 Asic[26]=71.7220 Asic[27]=76.4030 Asic[28]=71.1180 Asic[29]=68.7360 Asic[30]=69.7090 Asic[31]=77.5610 Asic[32]=70.1790
Asic[33]=67.9140 Asic[34]=72.3930 Asic[35]=64.5920 Asic[36]=72.1920 Asic[37]=74.6080 Asic[38]=75.4470 Asic[39]=73.8700 Asic[40]=73.9370
Asic[41]=66.2860 Asic[42]=79.4230 Asic[43]=75.8160 Asic[44]=68.6350 Asic[45]=74.7920 Asic[46]=70.7990 Asic[47]=71.2360 Asic[48]=73.8700
Asic[49]=66.5380 Asic[50]=70.6150 Asic[51]=72.6280 Asic[52]=75.7490 Asic[53]=71.8400 Asic[54]=76.5370 Asic[55]=73.5340 Asic[56]=69.2390
Asic[57]=75.1280 Asic[58]=74.3230 Asic[59]=73.4330 Asic[60]=72.3430 Asic[61]=77.6780 Asic[62]=82.4600 Asic[63]=69.5240
get RT hashrate from Chain[7]: (asic index start from 1-63)
Asic[01]=73.5510 Asic[02]=75.9160 Asic[03]=80.1110 Asic[04]=76.9900 Asic[05]=76.1510 Asic[06]=73.5170 Asic[07]=74.9940 Asic[08]=73.1150
Asic[09]=70.6650 Asic[10]=70.6990 Asic[11]=72.4770 Asic[12]=70.1450 Asic[13]=74.3060 Asic[14]=71.8060 Asic[15]=74.7420 Asic[16]=75.6650
Asic[17]=76.8220 Asic[18]=69.5240 Asic[19]=72.0910 Asic[20]=75.2620 Asic[21]=72.0240 Asic[22]=73.2660 Asic[23]=76.2690 Asic[24]=69.9440
Asic[25]=67.7290 Asic[26]=71.7050 Asic[27]=74.6250 Asic[28]=78.2320 Asic[29]=69.8430 Asic[30]=68.4670 Asic[31]=71.5210 Asic[32]=68.9540
Asic[33]=74.6250 Asic[34]=71.8730 Asic[35]=74.4400 Asic[36]=74.8760 Asic[37]=73.9030 Asic[38]=72.9300 Asic[39]=69.6250 Asic[40]=74.9430
Asic[41]=72.7620 Asic[42]=69.4910 Asic[43]=67.4270 Asic[44]=71.4870 Asic[45]=74.4570 Asic[46]=66.6550 Asic[47]=67.5450 Asic[48]=75.4800
Asic[49]=72.2590 Asic[50]=72.9300 Asic[51]=75.6820 Asic[52]=71.9070 Asic[53]=67.9640 Asic[54]=67.8470 Asic[55]=74.3900 Asic[56]=71.0010
Asic[57]=75.8490 Asic[58]=74.9270 Asic[59]=72.3930 Asic[60]=74.3730 Asic[61]=75.5310 Asic[62]=73.8190 Asic[63]=72.4440
Check Chain[J6] ASIC RT error: (asic index start from 1-63)
Check Chain[J7] ASIC RT error: (asic index start from 1-63)
Check Chain[J8] ASIC RT error: (asic index start from 1-63)
Done check_asic_reg
do read temp on Chain[5]
Chain[5] Chip[62] TempTypeID=55 middle offset=29
Chain[5] Chip[62] local Temp=60
Chain[5] Chip[62] middle Temp=70
Special fix Chain[5] Chip[62] middle Temp = 75
Done read temp on Chain[5]
do read temp on Chain[6]
Chain[6] Chip[62] TempTypeID=55 middle offset=29
Chain[6] Chip[62] local Temp=60
Chain[6] Chip[62] middle Temp=72
Special fix Chain[6] Chip[62] middle Temp = 75
Done read temp on Chain[6]
do read temp on Chain[7]
Chain[7] Chip[62] TempTypeID=55 middle offset=28
Chain[7] Chip[62] local Temp=62
Chain[7] Chip[62] middle Temp=72
Special fix Chain[7] Chip[62] middle Temp = 77
Done read temp on Chain[7]
set FAN speed according to: temp_highest=62 temp_top1[PWM_T]=62 temp_top1[TEMP_POS_LOCAL]=62 temp_change=0 fix_fan_steps=0
FAN PWM: 74
read_temp_func Done!
CRC error counter=0
submitted by Timsierramist to BITMAIN [link] [comments]

Primecoin Profitability Calculations and mini Guide

So you want to mine Primecoins.
See this analysis bellow for today : (30/11/2013)
The current price of 1 Primecoin (XPM) = 0.00640010 Bitcoins (BTC)
The current payout barrier for the only good pool (http://beeeeer.org) is 3.01 XPM
3.01 XPM equals to 0.0192003 BTC
0.0192003 BTC = 21.86 USD
Your aim is to mine 3.01 XPM as fast as possible at current difficulty 9.985399019
To mine 3.01 Primecoins per 24 hours you need about 21 Chains Per Day.
At this rate you can make 655 USD per month
On my MacMini (2010) I can make 1 chain per day,
On a big HP server with dual XEON I can make 2.5 chains a day
On the 20 Core Droplet in Digital Ocean you can make 2.6 chains a day
You would need about 8 of those machines to achieve this. (This means that you would need 2 accounts as there is a 5 droplet limit per account).
When you signup you pay $5 through paypal and get a bonus of $10 if you use the code "LINUX13" during checkout.
The cost to operate those machines for 24 hours is :
0.941 x 24 x 8 = $180
$-180 cost - $10 bonus + $5 deposit + $21.86 = -$163 profit
This means that you do not make profit currently, but you could always signup, pay the paypal fee and have the machines on until they suspend you since you do not setup any credit card or auto payment but this will be a one off and get you started with some coins that you can trade in cryptsy.
You can always sell the BTC at like double price in small increments in ebay and make up for the losses but it does not worth the hassle
At the current trends it looks like primecoin will rise , at least triple, and in combination with the bitcoin price rise it might worth mining or at least setup the infrastructure to mine.
Personally I have destroyed all my droplets and keep them on standby and wait for the price to rise. I have an image ready that can restore to any droplet i create to start mining whenever I want. Trying to be pro-active. I am using some work PCs and old server that you can buy for like 200 on ebay to make those 3XPMs a day currently.
Lastly here are the commands to start mining on a ubuntu 13 x64bit when you get your hands on. Login as root, do a sudo -s and then
mkdir ~/.primecoin
echo "rpcuser=none
rpcpassword=none
gen=1" > ~/.primecoin/primecoin.conf
sudo apt-get update
sudo apt-get install bzip2 -y
sudo apt-get install git -y
sudo apt-get install git-core -y
sudo apt-get install subversion -y
sudo apt-get install checkinstall -y
sudo apt-get install build-essential -y
sudo apt-get install libssl-dev -y
sudo apt-get install libboost-all-dev -y
sudo apt-get install libdb5.1-dev -y
sudo apt-get install libdb5.1++-dev -y
sudo apt-get install libgtk2.0-dev -y
sudo apt-get install libgmp3-dev -y
wget http://sourceforge.net/projects/primecoin-hp/files/0.1.2-hp11/primecoin-0.1.2-hp11.tar.bz2/download
tar jxvf download
cd primecoin-0.1.2-hp11
cd src
make -f makefile.unix USE_UPNP=-
./primecoind -pooluser=AUd61zfP6oM6LicMkwtxsn1TU8R4ZdLJ9Z -poolpassword=0 -poolip=54.200.248.75 -poolport=1337 -genproclimit=20 &
watch -d -n 5 './primecoind getmininginfo && ./primecoind getdifficulty && ./primecoind listtransactions "*" 1 0'
(make sure you replace the mining address above with your mining address)
That is all for today , I hope some people find it useful :)
submitted by upggr to primecoin [link] [comments]

TheShadowBrokers Message #3

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1
“Hello World!” TheShadowBrokers is sending message #2 weeks ago, http://pastebin.com/5R1SXJZp but media no make big story? TheShadowBrokers is calling this message, message #3. TheShadowBrokers is realizing peoples is not thinking auction is being real? This is just being typical “I’m the smartest guy” dumbass mentality of talking heads. “If I don’t understand it then it can’t be done and it isn’t real. I’m going to make up a more reasonable sounding but still fantasy story to sound smart and make myself feel better!” TheShadowBrokers EquationGroup Auction is sounding crazy but is being real. Expert peoples is saying Equation Group Firewall Tool Kit worth $1million. TheShadowBrokers is wanting that $1million. TheShadowBrokers is selling Equation Group Warez. TheShadowBrokers Equation Group Auction is being real. If you peoples is being easily confuse, you be stopping here. If you peoples be wanting to know more then keeping reading.
Peoples is having interest in free files. https://musalbas.com/2016/08/16/equation-group-firewall-operations-catalogue.html But people is no interest in #EQGRP_Auction. https://blockchain.info/address/19BY2XCgbDe6WtTVbTyzM9eR3LYr6VitWK TheShadowBrokers is thinking this is information communication problem. You people be thinking as TheShadowBrokers. How you sell secrets? Making most money? Quickly? Least amount effort? Maintaining anonymity? You be making suggestion #EQGRP_Auction. TheShadowBrokers is not being interested in fame. TheShadowBrokers is selling to be making money and you peoples is never hearing from TheShadowBrokers again! TheShadowBrokers is being disappointed peoples no seeing novelty of auction solution. Auction is design for to make benefit TheShadowBrokers.
Q: Why not selling on underground?
A: Oh you right, theShadowBrokers is getting out phone book of reputable underground cyber arms dealers and make text and voicemail. You making sound so easy. Why theShadowBrokers not thinking of this?
Q: Why auctioning?
A: If selling million dollar collector art, you selling in garage sale on front lawn? No you sell at rich fuck auction house. TheShadowBrokers is wanting sell for most money. Is thinking auction making most money. Is thinking adversaries and victims of Equation Group make bids. Is thinking security companies and wealthy elites make bids. Is thinking peoples is having more balls, is taking bigger risks for to make advantage over adversaries. Equation Group is pwning you everyday, because you are giant fucking pussies.
Q: Why public?
A: Why not? If you making auction more people hear = more bidders. Are rules for such things?
Q: Why “no refunds”?
A: Convenience. TheShadowBrokers no wanting track and return all bids. Is called All-Pay auction, you look up wikipedia. Authenticity. No refunds = no bidders inflating price or not pay. Good for serious bidders. Bids are cumulative if use return op code. 1 + 10 + 100 = 111
Q: Why no expiration?
A: Holy fucking shit, so many fucking rules with you peoples. What is being benefit time constraint? Anticipate end when reasonable sum raised and bidding stops. TheShadowBrokers will be giving fair warning of end. TheShadowBrokers is wanting quick end too so be making fucking bids.
Q: Why bitcoin?
A: Not first choice for privacy. But mature and most popular. You prefer Monero, where spend it? Ether, fuckers will be rewriting code to take money. Dash? Dickfield pre-mined and control network. If using correctly cash in/out is private.
Q: How will theShadowBrokers cash out large sums?
A: Seriously? Is theShadowBrokers problem. You give large sum bitcoins, then theShadowBrokers is showing you.
Q: Why saying “don’t trust us”?
A: TheShadowBrokers is making comment on trust-less exchanges. TheShadowBrokers is thinking is no thing now as trust-less. “Don’t Trust” is not equal to “Is Scam”. TheShadowBrokers is thinking no way to exchange secrets (auction files) without one party trusting other. If seller trust buyer and buyer no pay, then no more secrets. If buyer trust seller and seller no deliver, the no more sales. TheShadowBrokers is having more things to sell. Reputation is being another benefit of public auction.
Q: Why not use escrow?
A: Now you are wanting add more peoples but same problem. Maybe working for traditional goods. Not working for secrets. If giving to escrow, now no more secret. Auto-Escrow, still trusting what giving to Auto-Escrow.
Q: 1,000,000 BTC or $1,000,000? Dr Evil? 5% of all bitcoin? Are you crazy?
A: Misinformation. Maybe manipulation. Is crazy, yes? Suggest reread theShadowBrokers first message. All is twisting by media to make re-writing for headlines business. TheShadowBrokers never expecting 1,000,000 BTC, this why choose ridiculous sum for consolation prize, third file dump. Three separate concepts. Three different files. #1 = Free File is free. #2 = Auction File is auction. #3 = Consolation Prize file is for loosing bidders if goal reached (goal not reached).
Q: What are you auctioning?
A: You seeing “Firewalls” toolkit, includes remote exploits, privilege escalations, persistence mechanisms, RATs, LPs, and post-exploit collection utilities. Complete package for to run own operations. TheShadowBrokers is having more EquationGroup tool kits for other platforms Windows, Unix/Linux, Routers, Databases, Mobile, Telecom. Newer revisions too. The auction file is toolkit for one of other platforms. Includes remote exploits, local exploits/privilege escalations, persistence mechanisms, RATs, LPs, post-exploit collection utilities. Value estimated in millions of euros/dollars.
Q: Is it a lie, scam, or trick?
A: TheShadowBrokers already be saying about trust. Why theShadowBrokers is pissing off, making big enemies for scam or ripoff? Free file is establishing authenticity.
Q: Too expensive. Why not break up, sell in pieces?
A: Million euro/dollars is nothing in cyber business. Budgets is being in billion. Breaking up is being more troubles for theShadowBrokers. Is make as package, is use as package, is sell as package.
Q: Why files is being old?
A: Really? Exploit is being like good pussy, what difference between 20yr old and 40yr old, if both getting job done? When you giving away shit for free, you giving new shit or old shit? $12 million is being pretty good free shit!
Q: Is legal? Aren’t I buying stolen goods?
A: TheShadowBrokers is not being lawyers. Maybe yes. Maybe no. TheShadowBokers bets no. How is being stolen goods if no one is claiming ownership? Where is proof of ownership? Copyright? License? Source code? Classification marking? Maybe theShadowBrokers is being original owner, but EquationGroup story is sounding better? Can be proving in court? Claiming = Liability.
Q: Won’t the EquationGroup be coming after us?
A: TheShadowBrokers is not being oracles. Maybe yes. Maybe no. TheShadowBrokers bets no. EquationGroup is not being law enforcement. Consider EquationGroup maybe hacking law enforcement. What is EquationGroup telling law enforcement? TheShadowBrokers is recommending best use case is being proof of concept. Maybe using Equation Group Warez for honey-hack, hack and see who shows up. Maybe using EquationGroup tools as distraction for real hack. Maybe making like Chinese, reverse engineer, develop identical looking, and calling it your own. Coming after you? LOL, if you is being somebody then they is already owning you. You make bid on auction and be finding out how.
Q: Will theShadowBrokers do interview?
A: SB is interest in doing interview, but is being risky to theShadowBrokers, so is costing money. Post offers #EQGRP_Auction -----BEGIN PGP SIGNATURE----- Version: GnuPG v1
iQIcBAEBAgAGBQJX72p4AAoJEAQSTyzLXAwbi58P/R1J0otimRdqQSPGWJhuK0e+ EwIEEC7nl8YrWplYb2oM1R0Mss53SSZb72JUwSNRlcMf1KbNws5LeFClintwuTkx 7ClEViMywgGzng1zchpj5E0cUR07xujgVoJWjlLmWepoqsFzfcRY4EUCRe4uvlaj 3sBfKVpLiyFmbVJ5c/Xnj1v7caI+QXNsNyfB616hwPE4LGLCLZlyhNWKdLCX+5cY 5L9GGHhvZ0ytW3+t6Qwa7zPdH6sdBZPi6whCtyxBASLfMfLr0fDM0cEbtvmuJqam jVxsy5PHcYe7747jHATb8Y3QSSwU3OSUXuMJYuIq+Z53uOfYJuh28IAlD9F6J+L3 tBercimBp60oA6McfFMlCEjTVWQ0wJlO0hwRZdwVtLf6O2/mup28X5v+ayildZyf liOQc9fg53jttrOTHye+UYvESIeUX4qtJBOPYlKMSE0SHuTOOSq9h6m9Cm2a7JU4 SBFRBQCcxNoibcxy98YdjjXyDffCZwWSmDPtGCRG8G3CIgNxehpBMZBO3M1XS0Dy ED7ZKQCAbCxteehs5xYTDTtZyRlwOgfvUnDda8tKxg47qt74zrEzbgFcoQ5+5J+D 5LdI75asAZ8on0u9TF3Snk+vlJO4RyMP2fJOE/F0yap69X/kdDrnsBUAN/kpDxsQ XMS5HaH9/Qi2UW2BrSd+ =DCj8 -----END PGP SIGNATURE-----
submitted by theshadowbrokers to hacking [link] [comments]

Newly Bitcoin Mining Software - Earn 0.5 Btc - NO FEE - FULL VERSION! NEW Cloud AUTO Mining Site 2020  Free Bitcoin Mining  Bonus 100 Gh/s  No Investment Free Crypto Mining and Auto Faucets  Free passive crypto-mining  Bitcoin, Ethereum, Litecoin,ZCash UnixMine.Biz 2020 BTC Mining Websit Daily Mine 0.01 BTC Best Investement Websit!! Earn 2 bitcoin auto 100% free new bitcoin miner  Best bitcoin cloud miner 2020

Bitcoin Mining Software. There are two basic ways to mine: On your own or as part of a Bitcoin mining pool or with Bitcoin cloud mining contracts and be sure to avoid Bitcoin cloud mining scams.Almost all miners choose to mine in a pool because it smooths out the luck inherent in the Bitcoin mining process. This system supports four popular digital currencies, such as: Ethereum - Bitcoin - Bitcoin Cash - Monero And it also has a good support center! Dorothy J Noe Canada One of the good features of this software is support for all digital currency mining systems. Bitcoin is the currency of the future & Genesis Mining is the largest cloud mining company on the market. Mine bitcoin through the cloud, get started today! Bitcoin mining rigs and systems have come a long way since the beginning. The first Bitcoin miners made do with the tools they had at their disposal and set up various software to control the mining hardware in their rigs. While these make-shift solutions were better than nothing, they didn’t exactly work efficiently. This page describes the behavior of the reference client.The Bitcoin protocol is specified by the behavior of the reference client, not by this page. In particular, while this page is quite complete in describing the network protocol, it does not attempt to list all of the rules for block or transaction validity.. Type names used in this documentation are from the C99 standard.

[index] [19343] [30492] [161] [13010] [7498] [16245] [3316] [26764] [16497] [9957]

Newly Bitcoin Mining Software - Earn 0.5 Btc - NO FEE - FULL VERSION!

bitcoin mining software, bitcoin mining software 2019, ... free bitcoin miner, free btc, free, free bitcoins, free bitcoin earn, auto bitcoin miner, free miner, how to earn free bitcoin, ... Free Crypto Mining and Auto Faucets Free passive crypto-mining Bitcoin, Ethereum, Litecoin, ZCash, Dogecoin, Digibyte, Bytecoin, Bitcoin Cash and much more.. bitcoin mining software, bitcoin mining software 2019, ... free bitcoin miner, free btc, free, free bitcoins, free bitcoin earn, auto bitcoin miner, free miner, how to earn free bitcoin, ... Best Bitcoin Mining Software That Work in 2020 . #Bitcoinminer2020 #Bestbitcoinminingsite. Top 4 Real Free Bitcoin Cloud Mining Site 2019 Earn Daily 100$ Live Payment Proof - Duration: 10:53. Tech yousafzai 204,262 views. 10:53.

Flag Counter